[65947] in North American Network Operators' Group

home help back first fref pref prev next nref lref last post

Re: Bandwidth Control Question

daemon@ATHENA.MIT.EDU (Jared Mauch)
Fri Dec 19 12:11:46 2003

Date: Fri, 19 Dec 2003 12:05:10 -0500
From: Jared Mauch <jared@puck.nether.net>
To: Brennan_Murphy@NAI.com
Cc: garlic@garlic.com, Tom.Claydon@DobsonTelco.net, nanog@merit.edu
In-Reply-To: <FF6F5696A661404E8E2C0DF39A1D72B603041EE9@sncexmb1.corp.nai.org>
Errors-To: owner-nanog-outgoing@merit.edu


	Incase you didn't notice, the original poster works
for a Telephone Company.

	Such things as short distance x-connects, DS3, and other
services will make the most sense as they likely have the necessary
hardware and equipment to test and repair these types of cabling
whereas, wireless and other cable based solutions they will not
necessarily have the ability to repair at a low cost.

	This is not to say that I don't think that telephone
companies shouldn't be looking at more fiber based CPE solutions,
I suspect that this isn't something that Tom can influence.

	- Jared

On Fri, Dec 19, 2003 at 08:49:11AM -0800, Brennan_Murphy@NAI.com wrote:
> Or wireless. 
> 
> 	-----Original Message-----
> 	From: owner-nanog@merit.edu [mailto:owner-nanog@merit.edu] On
> Behalf Of Roy
> 	Sent: Friday, December 19, 2003 11:30 AM
> 	To: Claydon, Tom; nanog@merit.edu
> 	Subject: RE: Bandwidth Control Question
> 	
> 	
> 	Why waste a T3 port.  Run ethernet if they are that close.
> Don't overlook the benefit of using the old thin-net for 200m.
> 	 
> 	 -----Original Message-----
> 	From: owner-nanog@merit.edu [mailto:owner-nanog@merit.edu]On
> Behalf Of Claydon, Tom
> 	Sent: Friday, December 19, 2003 7:26 AM
> 	To: 'nanog@merit.edu'
> 	Subject: Bandwidth Control Question
> 	
> 	
> 
> 		Hello, 
> 
> 		A customer of ours in the next building would like 6M of
> Internet bandwidth from us, so we would wire a DS3 between the two
> buildings for connectivity.
> 
> 		The question is: how to we control the amount of
> bandwidth that we give them? Could we use rate limiting to contain the
> bandwdith to 6M, our would we need to get external IDSU's to do that?
> 
> 		Note: we have a Cisco 7206VXR router on our end. The
> customer has a Cisco 7513. 
> 
> 
> 		Thanks, 
> 		  
> 		= TC 
> 		  
> 		-- 
> 		Tom Claydon, IT/ATM Network Engineer 
> 		Dobson Telephone Company 
> 		phone: (405) 391-8201  cell: (405) 834-0341 
> 

-- 
Jared Mauch  | pgp key available via finger from jared@puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.

home help back first fref pref prev next nref lref last post