[59552] in North American Network Operators' Group
Why can't I default Originate?
daemon@ATHENA.MIT.EDU (Vandy Hamidi)
Tue Jul 8 15:44:11 2003
Date: Tue, 8 Jul 2003 12:43:35 -0700
From: "Vandy Hamidi" <vandy.hamidi@markettools.com>
To: <nanog@merit.edu>
Errors-To: owner-nanog-outgoing@merit.edu
Platform:
Cisco 7206VXR
SW:
Version 12.2(15)T2
router#sh run | b bgp
router bgp 65011
no synchronization
bgp log-neighbor-changes
bgp confederation identifier 12345
bgp confederation peers 65001 65021=20
bgp deterministic-med
bgp dampening
network 1.2.3.0 mask 255.255.255.0
neighbor Confed-Peer-Group peer-group
neighbor Confed-Peer-Group update-source FastEthernet1/1
neighbor Confed-Peer-Group next-hop-self
neighbor Confed-Peer-Group version 4
neighbor Confed-Peer-Group soft-reconfiguration inbound
neighbor Confed-Peer-Group filter-list 2 in
neighbor Confed-Peer-Group filter-list 1 out
neighbor 10.1.2.75 remote-as 65001
neighbor 10.1.2.75 peer-group Confed-Peer-Group
neighbor 10.1.2.75 password 7 05211F2C105211F2C1666B
neighbor 10.1.2.76 remote-as 65001
neighbor 10.1.2.76 peer-group Confed-Peer-Group
neighbor 10.1.2.76 password 7 05211F2C105211F2C1666B
no auto-summary
router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#router bgp 65011
router(config-router)#neighbor 10.1.2.75 default-originate=20
% Invalid command for a peer-group member
router(config-router)#
According to Cisco:
All members of a peer group must share identical outbound announcement =
policies (such as distribute-list, filter-list, and route-map), except =
for default-originate, which is handled on a per-peer basis even for =
peer group members.=20
I've also tried to apply to the peer group. The command is accepted, =
but no default origination of 0/0 is advertised to the peer(s).
Thanks in advanced for any help,
-=3DVandy=3D-
