[53295] in North American Network Operators' Group
RE: two questions
daemon@ATHENA.MIT.EDU (Poyerd, Denis)
Fri Nov 8 15:00:23 2002
From: "Poyerd, Denis" <Denis.Poyerd@veridian.com>
To: "''Scott Granados' '" <scott@wworks.net>,
"'nanog@merit.edu '" <nanog@merit.edu>
Date: Fri, 8 Nov 2002 14:59:14 -0500
Errors-To: owner-nanog-outgoing@merit.edu
Try groupstudy.com
-----Original Message-----
From: Christopher J. Wolff
To: 'Scott Granados'; nanog@merit.edu
Sent: 11/8/2002 2:40 PM
Subject: RE: two questions
Scott,
I've used the Cisco FE fiber port on a 7206vxr to connect to a CAT5 thru
a cheapie transceiver, works great.
Regards,
Christopher J. Wolff, VP CIO
Broadband Laboratories, Inc.
http://www.bblabs.com
-----Original Message-----
From: owner-nanog@merit.edu [mailto:owner-nanog@merit.edu] On Behalf Of
Scott Granados
Sent: Friday, November 08, 2002 12:33 PM
To: nanog@merit.edu
Subject: two questions
I have seen some router cpu questions. I know this is not the place for
router questions specifically could someone pass on the name of the
group
for cisco users I remember there was one. Also does anyone happen to
know
if the cisco fast E fiber port interoperates with off the shelf
tranceivers properly ie fiber to cat 5?
Thanks
