[50528] in North American Network Operators' Group
RE: Bonding ATM circuits for DSL
daemon@ATHENA.MIT.EDU (Christopher J. Wolff)
Thu Aug 1 16:51:18 2002
From: "Christopher J. Wolff" <chris@bblabs.com>
To: <nanog@merit.edu>
Date: Thu, 1 Aug 2002 13:50:40 -0700
In-Reply-To: <000101c2399c$7ee25a00$1809d440@Cartman>
Errors-To: owner-nanog-outgoing@merit.edu
I may have answered my own question. Create an IMA group interface.
Regards,
Christopher J. Wolff, CIO
Broadband Laboratories, Inc.
http://www.bblabs.com
-----Original Message-----
From: owner-nanog@merit.edu [mailto:owner-nanog@merit.edu] On Behalf Of
Christopher J. Wolff
Sent: Thursday, August 01, 2002 1:46 PM
To: nanog@merit.edu
Subject: Bonding ATM circuits for DSL
Greetings.
Has anyone experienced adding additional ATM DS3's and bonding those
together to form a single "fat pipe". For example if you had a Qwest
megacentral DSL DS3 loop and wanted to add another one to make 90 megs
instead of 45 megs is that done on the ISP side or the Telco side or
both? Thank you all so much for your wisdom.
Regards,
Christopher J. Wolff, CIO
Broadband Laboratories, Inc.
http://www.bblabs.com
