[195428] in North American Network Operators' Group
Re: Cisco Nexus 93180YC Switch Feedback
daemon@ATHENA.MIT.EDU (Simon Lockhart)
Tue Aug 8 19:29:48 2017
X-Original-To: nanog@nanog.org
Date: Tue, 8 Aug 2017 23:48:42 +0100
From: Simon Lockhart <simon@slimey.org>
To: Tim Stevenson <tstevens@cisco.com>
In-Reply-To: <201707260331.v6Q3Vtu0027729@bgl-core-1.cisco.com>
Cc: "nanog@nanog.org" <nanog@nanog.org>
Errors-To: nanog-bounces@nanog.org
On Tue Jul 25, 2017 at 08:31:54PM -0700, Tim Stevenson wrote:
> tstevens-92160yc-1# sh int cap | beg 1/49 | eg Eth|Speed
> Ethernet1/49 > Speed: 40000
> Ethernet1/50 > Speed: 1000,10000,25000,40000,50000,100000
> Ethernet1/51 > Speed: 40000
> Ethernet1/52 > Speed: 1000,10000,25000,40000,50000,100000
> Ethernet1/53 > Speed: 40000
> Ethernet1/54 > Speed: 40000
Are you sure?
xsw-01.ixn# show ver | incl Nexus9
cisco Nexus9000 C92160YC-X chassis
xsw-01.ixn# sh int cap | beg 1/49 | eg Eth|Speed
Ethernet1/49
Speed: 40000,100000
Ethernet1/50
Speed: 1000,10000,25000,40000,50000,100000
Ethernet1/51
Speed: 1000,10000,25000,40000,50000,100000
Ethernet1/52
Speed: 1000,10000,25000,40000,50000,100000
xsw-01.ixn# show run | incl portmode
hardware profile portmode 48x25G+4x100G
xsw-01.ixn(config)# hardware profile portmode ?
48x25g+2x100g+4x40g 48x25G+2x100G+4x40G port mode
48x25g+4x100g 48x25G+4x100G port mode
You can configure how the ports present themselves...
Simon
