[188825] in North American Network Operators' Group
Re: 10G-capable customer router recommendations?
daemon@ATHENA.MIT.EDU (David Sotnick)
Sun Apr 17 22:18:19 2016
X-Original-To: nanog@nanog.org
In-Reply-To: <CALwYWVPsoJoUDMExzdMwvUYrE-9H68wSZweTpXzykSahjYRNoA@mail.gmail.com>
Date: Sun, 17 Apr 2016 19:18:15 -0700
From: David Sotnick <sotnickd-nanog@ddv.com>
To: NANOG <nanog@nanog.org>
Errors-To: nanog-bounces@nanog.org
Thanks for the replies, everyone! Much appreciated.
I'm going to check out the Mikrotik CCR series out.
Cheers,
Dave
On Fri, Apr 15, 2016 at 1:18 PM, David Sotnick <sotnickd-nanog@ddv.com>
wrote:
> Hello masters of the Internet,
>
> I was recently asked to set up networking at a VIP's home where he has
> Comcast "Gigabit Pro" service, which is delivered on a 10G-SR MM port on a
> Comcast-supplied Juniper ACX-2100 router.
>
> Which customer router would you suggest for such a setup? It needs to do
> IPv4 NAT, DHCP, IPv4+IPv6 routing and have a decent L4 firewall (that also
> supports IPv6).
>
> The customer pays for "2Gb" service (Comcast caps this at 2G+10% =
> 2.2Gbps) and would like to get what he pays for (*cough*) by having the
> ability to stream two 1Gbps streams (or at least achieve > 1.0Gbps).
>
> I'm tempted to get another ACX-2100 and do a 4x1Gb LACP port-channel to
> the customer switch, or replace the AV-integrator-installed Cisco SG300-52P
> (Cisco switch with e.g. an EX-3300 with 10Gb uplinks).
>
> Thanks in advance for your suggestions.
>
> -Dave
>
