[188799] in North American Network Operators' Group

home help back first fref pref prev next nref lref last post

Re: 10G-capable customer router recommendations?

daemon@ATHENA.MIT.EDU (Josh Reynolds)
Fri Apr 15 18:15:45 2016

X-Original-To: nanog@nanog.org
In-Reply-To: <571165C8.7050000@fhrnet.eu>
Date: Fri, 15 Apr 2016 17:12:35 -0500
From: Josh Reynolds <josh@kyneticwifi.com>
To: Filip Hruska <fhr@fhrnet.eu>
Cc: NANOG <nanog@nanog.org>
Errors-To: nanog-bounces@nanog.org

As much as I enjoy Mikrotik products and respect my friends and peers who
use them, until ROS 7.x the CCR is a "gimped" product.
On Apr 15, 2016 5:10 PM, "Filip Hruska" <fhr@fhrnet.eu> wrote:

> Hi,
>
> I would also vote for Mikrotik products; IMHO this looks perfect for this
> situation.
>
> http://routerboard.com/CCR1009-8G-1S-1SplusPC
>
>
>
> On 04/16/2016 12:01 AM, mike.lyon@gmail.com wrote:
>
>> Check out the Mikrotik Cloud Core routers, they make them with SFP+
>> support now. I have one of them with 10g deployed right now.
>>
>> -Mike
>>
>> On Apr 15, 2016, at 14:52, Aaron <aaron@wholesaleinternet.net> wrote:
>>>
>>> Not a lot of 10G capable CPEs out there.  For our 10G residential
>>> customers we install Brocade ICXs.
>>>
>>> Aaron
>>>
>>>
>>> On 4/15/2016 3:18 PM, David Sotnick wrote:
>>>> Hello masters of the Internet,
>>>>
>>>> I was recently asked to set up networking at a VIP's home where he has
>>>> Comcast "Gigabit Pro" service, which is delivered on a 10G-SR MM port
>>>> on a
>>>> Comcast-supplied Juniper ACX-2100 router.
>>>>
>>>> Which customer router would you suggest for such a setup? It needs to do
>>>> IPv4 NAT, DHCP, IPv4+IPv6 routing and have a decent L4 firewall (that
>>>> also
>>>> supports IPv6).
>>>>
>>>> The customer pays for "2Gb" service (Comcast caps this at 2G+10% =
>>>> 2.2Gbps)
>>>> and would like to get what he pays for (*cough*) by having the ability
>>>> to
>>>> stream two 1Gbps streams (or at least achieve > 1.0Gbps).
>>>>
>>>> I'm tempted to get another ACX-2100 and do a 4x1Gb LACP port-channel to
>>>> the
>>>> customer switch, or replace the AV-integrator-installed Cisco SG300-52P
>>>> (Cisco switch with e.g. an EX-3300 with 10Gb uplinks).
>>>>
>>>> Thanks in advance for your suggestions.
>>>>
>>>> -Dave
>>>>
>>>
>>> --
>>> ================================================================
>>> Aaron Wendel
>>> Chief Technical Officer
>>> Wholesale Internet, Inc. (AS 32097)
>>> (816)550-9030
>>> http://www.wholesaleinternet.com
>>> ================================================================
>>>
>>>
>>

home help back first fref pref prev next nref lref last post