[182981] in North American Network Operators' Group
Re: A simple perl script to convert Cisco IOS configuration to HTML
daemon@ATHENA.MIT.EDU (Jesse McGraw)
Thu Aug 6 20:23:12 2015
X-Original-To: nanog@nanog.org
Date: Thu, 06 Aug 2015 20:23:07 -0400
From: Jesse McGraw <jlmcgraw@gmail.com>
To: "Akyol, Bora A" <bora@pnnl.gov>
In-Reply-To: <D1E90F14.1D76B%bora@pnnl.gov>
Cc: nanog@nanog.org
Errors-To: nanog-bounces@nanog.org
I've now added some initial support for NXOS
On 08/06/2015 04:18 PM, Akyol, Bora A wrote:
> Jesse
>
> Does this also work for NXOS and IOS XR (thank you cisco)
>
> Thanks
>
> Bora
> PNNL.GOV
>
> On 8/6/15, 5:59 AM, "Jesse McGraw" <jlmcgraw@gmail.com> wrote:
>
>> All,
>>
>> (This is me scratching an itch of my own and hoping that it might
>> be useful to others on this list. Apologies if it isn't)
>>
>> When trying to comprehend a new or complicated Cisco router
>> configuration an old pet-peeve of mine is how needlessly difficult it is
>> to search for a list referenced by a command, figure out what it does,
>> then find my way back to the original command (by which time Iıve
>> forgotten the details of the list) and figure out what it's doing with
>> that list.
>>
>> So Iıve been working on a small perl script to add links within IOS
>> configuration files, e.g. link to an access-list from the interface
>> where itıs applied, making it easier to to follow the chain of logic
>> with stuff like route maps or nested service policies via clicking links
>> and using the forward and back buttons in your browser to go back and
>> forth between command and referenced list.
>>
>> I know there is a lot of stuff I could add in to this (e.g. more
>> VRF-related commands, PIX/ASA, Juniper etc). Let me know if you think
>> of anything new or notice something Iıve done wrong , there's plenty of
>> room for improvement and expansion to other configuration formats.
>>
>>
>>
>> Notes:
>> Anything referenced (or potentially referenced) by something else
>> is in bold. It makes it very easy to see where ACLs etc. start and end
>>
>> There's also an option in there to reformat some numbers that are
>> hard to read (e.g. traffic shaping criteria) into more human-readable
>> ones. Pure fluff.
>>
>> Surely this has been done before but I couldn't find anything in a
>> few brief moments of searching so here we are.
>>
>>
>>
>> Files are here: https://github.com/jlmcgraw/networkUtilities
>>
>> At the very least you'll need iosToHtml.pl, pointers.pl, pointees.pl,
>> and human_readable.pl and several CPAN modules (see setup.sh for easy
>> ways to install them under Debian-derived Linux. I haven't tested this
>> at all under Windows or OS X)
>>
>> -Jesse
>
