[180507] in North American Network Operators' Group
Re: stacking pdu
daemon@ATHENA.MIT.EDU (Eric Tykwinski)
Fri Jun 5 17:31:27 2015
X-Original-To: nanog@nanog.org
From: Eric Tykwinski <eric-list@truenet.com>
In-Reply-To: <CAJ0Tj7eVqaKfryc+0m33pZKjG4rz+hU1r-rWP5vmqdRuUsihOA@mail.gmail.com>
Date: Fri, 5 Jun 2015 17:31:15 -0400
To: NANOG <nanog@nanog.org>
Errors-To: nanog-bounces@nanog.org
I was pretty much thinking the same, get a switched/metered outlet PDU. =
APC, ServerTech, et al have them, then daisy chain something like a Dell =
AP6015 off the outlet. No clue about NEC/local laws, but the Dells are =
pretty much setup for that type of setup.
> On Jun 5, 2015, at 5:20 PM, Brian Loveland <brian@bloveland.com> =
wrote:
>=20
> APC does make some 'half rack' PDU's that take a C20 inlet so they =
could
> hang off a C19 outlet on another PDU:
> =
http://www.apc.com/resource/include/techspec_index.cfm?base_sku=3DAP8858&d=
isplayList=3DALL&page_type=3Ddisplaybasic&printer_friendly=3Dyes
> =
http://www.apc.com/resource/include/techspec_index.cfm?base_sku=3DAP7821&d=
isplayList=3DALL&page_type=3Ddisplaybasic&printer_friendly=3Dyes
>=20
> On the software side, just use a "master" PDU with metering. These =
"sub"
> ones are also metered but you would want to look at the total =
utilization
> on the "master".
>=20
> No comment if its to code...
>=20
> On Fri, Jun 5, 2015 at 12:51 AM, shawn wilson <ag4ve.us@gmail.com> =
wrote:
>=20
>> Well, I was kinda thinking this would turn out to be a dumb question =
/ have
>> an obvious answer. Apparently not. But it seems I can't go buy a =
solution
>> either. I guess there isn't much of a market (though I am just =
talking
>> software - maybe someone could make an update :) ).
>>=20
