[179784] in North American Network Operators' Group
Re: Alcatel-Lucent 7750 Service Router (SR)
daemon@ATHENA.MIT.EDU (Craig)
Thu May 7 12:16:16 2015
X-Original-To: nanog@nanog.org
In-Reply-To: <D12C46B0-A109-4842-B82B-7957E0E8364D@gizmopartners.com>
Date: Thu, 7 May 2015 12:16:14 -0400
From: Craig <cvuljanic@gmail.com>
To: Chris Boyd <cboyd@gizmopartners.com>
Cc: NANOG <nanog@nanog.org>
Errors-To: nanog-bounces@nanog.org
yep.. its way easier and faster to take a look at what is configured:
A:R01>config>service>vprn# interface "to-what-ever-eBGP"
A:R01>config>service>vprn>if# info
----------------------------------------------
description "L3 Ckt ID: 555555555555"
enable-ingress-stats
cpu-protection 231
address 299.299.299.299/30
cflowd interface
ipv6
address 2001:xxxx:xxxxx::xxxxx/126
exit
sap 1/1/2 create
cpu-protection 231
ingress
filter ip 3356
filter ipv6 3356
flowspec
exit
exit
----------------------------------------------
On Thu, May 7, 2015 at 12:08 PM, Chris Boyd <cboyd@gizmopartners.com> wrote=
:
>
> > On May 6, 2015, at 5:24 PM, Colton Conor <colton.conor@gmail.com> wrote=
:
> >
> > I am worried as most tech's know Cisco and Juniper, so going to ALU wou=
ld
> > be a learning curve based on replies I am getting off list.
>
> It=E2=80=99s not that hard to learn if you know the basics of IP routing.=
I just
> did an implementation of A-L 7705 SAR 8s and 18s. Now I really wish that
> Cisco supported the =E2=80=9Cinfo=E2=80=9D command.
>
> =E2=80=94Chris
>
>
