[169838] in North American Network Operators' Group
Re: L6-20P -> L6-30R
daemon@ATHENA.MIT.EDU (George Herbert)
Tue Mar 18 19:08:37 2014
In-Reply-To: <CAK__Kzt7mnc4QYpjQf4i0kJ4cf0JZJaJf+4Spdx7kBM59U4diQ@mail.gmail.com>
Date: Tue, 18 Mar 2014 15:57:27 -0700
From: George Herbert <george.herbert@gmail.com>
To: Mike Hale <eyeronic.design@gmail.com>
Cc: NANOG Operators' Group <nanog@nanog.org>
Errors-To: nanog-bounces+nanog.discuss=bloom-picayune.mit.edu@nanog.org
Crap, was looking at the non-locking ones. Ignore that.
On Tue, Mar 18, 2014 at 3:54 PM, George Herbert <george.herbert@gmail.com>wrote:
>
> https://www.21cii.com/ITStudio/Content/Resources/Images/Appendix/Plug%20&%20Power/SB%202P-3W_505x447.png
>
> I think the 250 v 15 amp plugs fit in the 20 amp sockets, but the 20s
> don't fit in the 30 sockets.
>
> This sort of thing is usually an adapter, a little cylinder with a L6-20R
> on one end and a L6-30P on the other, since the loads are safe. Either
> that, or a short jumper cable wired the same way.
>
>
> On Tue, Mar 18, 2014 at 3:46 PM, Mike Hale <eyeronic.design@gmail.com>wrote:
>
>> They're different. You can't force them.
>>
>> On Tue, Mar 18, 2014 at 12:24 PM, Randy <amps@djlab.com> wrote:
>> > I have a situation where a 208v/20A PDU (L6-20P) is supposedly hooked
>> to a
>> > 208v/30A circuit (L6-30R). Before I order the correct PDU's and whip
>> > cords...sanity check...are connectors 'similar' enough that this is
>> possible
>> > (with force) or am I going to find we've actually got L6-20R's on the
>> > provider side?
>> >
>> > --
>> > ~Randy
>> >
>>
>>
>>
>> --
>> 09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0
>>
>>
>
>
> --
> -george william herbert
> george.herbert@gmail.com
>
--
-george william herbert
george.herbert@gmail.com
