[167949] in North American Network Operators' Group
Re: Catalyst IOS refresher site?
daemon@ATHENA.MIT.EDU (Justin Wilson)
Wed Jan 1 21:50:25 2014
Date: Wed, 01 Jan 2014 21:50:04 -0500
From: Justin Wilson <lists@mtin.net>
To: NANOG <nanog@nanog.org>
In-Reply-To: <4100472.664.1386968370819.JavaMail.root@benjamin.baylink.com>
Errors-To: nanog-bounces+nanog.discuss=bloom-picayune.mit.edu@nanog.org
If it were me I would pickup a SupIII or SupIV off ebay. They are
pretty cheap.
Justin
---
Justin Wilson <j2sw@mtin.net>
MTIN Consulting
Mikrotik =AD UBNT =AD Climbing =AD Network Design
http://www.mtin.net/ <http://www.mtin.net>
http://www.thebrotherswisp.com
-----Original Message-----
From: Jay Ashworth <jra@baylink.com>
Date: Friday, December 13, 2013 at 3:59 PM
To: NANOG <nanog@nanog.org>
Subject: Re: Catalyst IOS refresher site?
>----- Original Message -----
>> From: "Jeremy Bresley" <brez@brezworks.com>
>
>> Might help if you said what type of line cards and sup you've got. A
>> SupII era card is CatOS, SupIII and newer are IOS, command sets are
>> completely different, and depending on the line cards you've got, you
>> might have some of the really old L2 only cards (can't remember if you
>> could do L3 on the bastard Gig/FE cards only, or if it was dependent
>> on the particular Sup installed). That said, if it's an IOS Sup, I'd
>> start here:
>>=20
>>http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_command_refer
>>ence_list.html
>
>Hmm. I wasn't smart enough to shoot a pic of the front panel, and I'm
>not picking it up til Monday, so I don't know. I have some background
>in Catalyst IOS, but it's old and on 3500-class switches, not the
>bigger iron. =20
>
>Thanks,=20
>-- jra
>--=20
>Make Election Day a federal holiday: http://wh.gov/lBm94 100k sigs by
>12/14
>
>Jay R. Ashworth Baylink
>jra@baylink.com
>Designer The Things I Think RFC
>2100
>Ashworth & Associates http://baylink.pitas.com 2000 Land
>Rover DII
>St Petersburg FL USA #natog +1 727 647
>1274
>