[167531] in North American Network Operators' Group
Re: BGP from Juniper to Cisco ASR
daemon@ATHENA.MIT.EDU (Philip Lavine)
Wed Dec 18 11:16:18 2013
Date: Wed, 18 Dec 2013 08:16:05 -0800 (PST)
From: Philip Lavine <source_route@yahoo.com>
To: Eric Dugas <EDugas@zerofail.com>, NANOG list <nanog@nanog.org>
In-Reply-To: <656AAF5E8566DF47835F38F66FA8213A15E4773E@ZF-EXC1.Pre2Post.local>
Reply-To: Philip Lavine <source_route@yahoo.com>
Errors-To: nanog-bounces+nanog.discuss=bloom-picayune.mit.edu@nanog.org
yes I tried =A0multihop =0Aeven though my peer is on the same /29=0A=0A=0A=
=0AOn Wednesday, December 18, 2013 8:10 AM, Eric Dugas <EDugas@zerofail.com=
> wrote:=0A =0AProbably a TTL problem. Did you configure ebgp-multihop?=0A=
=0AEric Dugas=0AZEROFAIL / AS40191=0Aedugas@zerofail.com=0A=0A=0A-----Origi=
nal Message-----=0AFrom: Philip Lavine [mailto:source_route@yahoo.com] =0AS=
ent: December 18, 2013 10:48 AM=0ATo: NANOG list=0ASubject: BGP from Junipe=
r to Cisco ASR=0A=0ADec 18 07:46:33: %BGP-3-NOTIFICATION: received from nei=
ghbor=A0<REMOTE PEER> active 2/5 (authentication failure) 0 bytes Dec 18 15=
:46:33.615: BGP: ses global=A0<REMOTE PEER> (0x7FB1CD209CF0:0) act Receive =
NOTIFICATION 2/5 (authentication failure) 0 bytes =0A=0AAlthough I have see=
m this on the message boards I am little confused in that the ISP is tellin=
g me that there is no authentication enabled on the Juniper and I do not ha=
ve authentication enabled on the ASR. So what is going on here?
