[164297] in North American Network Operators' Group
RE: Ciena 6200 clue?
daemon@ATHENA.MIT.EDU (Phil Bedard)
Wed Jul 3 19:58:38 2013
From: Phil Bedard <bedard.phil@gmail.com>
Date: Wed, 3 Jul 2013 16:58:13 -0700
To: Bryan Fields <Bryan@bryanfields.net>, NANOG list <nanog@nanog.org>
Errors-To: nanog-bounces+nanog.discuss=bloom-picayune.mit.edu@nanog.org
Right that is the "workaround." :)
Phil From: Bryan Fields
Sent: 7/3/2013 18:15
To: NANOG list
Subject: Re: Ciena 6200 clue?
On 7/3/13 5:41 PM, Phil Bedard wrote:
> The ALU 7750/7450, etc. routers have a separate routing
> process/configuration for their OOB mgmt and as of the last time I looked
> do not support a default gateway.
Well you can set up multiple static routes. The only route you can't
set it 0/0.
This will work, though I'd suggest only putting the management routes it needs
in it.
A:Milhouse>bof# static-route 0.0.0.0/0 next-hop 1.0.0.2
MINOR: SYSTEM #1505 Invalid static route destination prefix - cannot configure
default route on the management interface
A:Milhouse>bof# static-route 0.0.0.0/1 next-hop 1.0.0.2
*A:Milhouse>bof# static-route 128.0.0.0/1 next-hop 1.0.0.2
*A:Milhouse>bof# show bof
===============================================================================
BOF (Memory)
===============================================================================
primary-image nope.jpg
primary-config Milhouse/config.cfg
address 1.0.0.70/24 active
primary-dns 1.0.0.2
dns-domain nope.jpg
static-route 0.0.0.0/1 next-hop 1.0.0.2
static-route 128.0.0.0/1 next-hop 1.0.0.2
autonegotiate
duplex full
speed 100
wait 4
persist on
no li-local-save
no li-separate
console-speed 115200
===============================================================================
--
Bryan Fields
727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net
