[151381] in North American Network Operators' Group
Re: dell switch config export
daemon@ATHENA.MIT.EDU (Jay Mitchell)
Fri Mar 16 23:54:38 2012
In-Reply-To: <4F63F164.2020207@mompl.net>
From: Jay Mitchell <jay@miscreant.org>
Date: Sat, 17 Mar 2012 14:52:45 +1100
To: Jeroen van Aart <jeroen@mompl.net>
Cc: NANOG list <nanog@nanog.org>
Errors-To: nanog-bounces+nanog.discuss=bloom-picayune.mit.edu@nanog.org
If it's tftp on Linux there's a flag you can pass tftpd at startup to allow c=
reation of files, can't remember off the top of my head what it is, it may b=
e -s.
--jm
Sent from my iPhone
On 17/03/2012, at 1:05 PM, Jeroen van Aart <jeroen@mompl.net> wrote:
> Jeroen van Aart wrote:
>> Ryan Malayter wrote:
>>> not designed or coded by a native English speaker. You have to use the "=
upload" link to export config, and put in the address of your TFTP server, s=
ince you are "uploading" from the switch to the tftp server.
>> Yes I tried that. However the switch complains with an error about file=20=
>=20
> I got that figured out. My experience with tftp is a bit limited. I had to=
create the file first and then change permissions to 666. Then run this on t=
he switch:
>=20
> copy running-config tftp://x.x.x.x/name
>=20
> I first thought I also had to add a path.
>=20
> Thanks,
> Jeroen
>=20
> --=20
> Earthquake Magnitude: 4.4
> Date: Saturday, March 17, 2012 01:38:06 UTC
> Location: Banda Sea
> Latitude: -7.0373; Longitude: 123.4202
> Depth: 621.60 km
>=20
