[150853] in North American Network Operators' Group

home help back first fref pref prev next nref lref last post

RE: VLAN Troubles

daemon@ATHENA.MIT.EDU (Jonathon Exley)
Tue Mar 6 16:33:38 2012

From: Jonathon Exley <Jonathon.Exley@kordia.co.nz>
To: "nanog@nanog.org" <nanog@nanog.org>
Date: Tue, 6 Mar 2012 21:32:33 +0000
In-Reply-To: <CADECfTUZp9UbtdRVDR3dm4W-0xiu-PQp2ZjjOz+e=BNR=F9jNw@mail.gmail.com>
Errors-To: nanog-bounces+nanog.discuss=bloom-picayune.mit.edu@nanog.org

If it's still not working, try capturing traffic from the Dell switches wit=
h Wireshark and then send traffic from the Cisco switch and also capture th=
at. Compare the frames and check that the salient parts line up - e.g. Ethe=
rtype.


Jonathon=20


-----Original Message-----
From: Peter Ehiwe [mailto:peterehiwe@gmail.com]=20
Sent: Wednesday, 7 March 2012 5:40 a.m.
To: Alan Bryant
Cc: nanog@nanog.org
Subject: Re: VLAN Troubles

yep , verify how dell tags the vlans , it may use a proprietory tagging met=
hod for the trunk.

On Tue, Mar 6, 2012 at 5:36 PM, Alan Bryant <alan@alanbryant.com> wrote:

> Thank you for the suggestions, unfortunately none of them are working.
>
> I have tried with the uplink in general & trunk mode. I have allowed=20
> all vlans and allowed only the specific vlans I am using tagged and=20
> untagged, but it is still not passing vlan 12.
>
>


--
Warm Regards

Peter(CCIE 23782).
This email and attachments: are confidential; may be protected by privilege=
 and copyright; if received in error may not be used, copied, or kept; are =
not guaranteed to be virus-free; may not express the views of Kordia(R); do=
 not designate an information system; and do not give rise to any liability=
 for Kordia(R).



home help back first fref pref prev next nref lref last post