[150078] in North American Network Operators' Group
RE: Colo Vending Machine
daemon@ATHENA.MIT.EDU (Sven Olaf Kamphuis)
Fri Feb 17 14:03:15 2012
Date: Fri, 17 Feb 2012 19:01:39 +0000 (UTC)
From: Sven Olaf Kamphuis <sven@cb3rob.net>
To: Erik Soosalu <erik.soosalu@calyxinc.com>
In-Reply-To: <0B224A2FE01CC54C860290D42474BF60052D54BB@exchange.nff.local>
Cc: NANOG <nanog@nanog.org>
Errors-To: nanog-bounces+nanog.discuss=bloom-picayune.mit.edu@nanog.org
On Fri, 17 Feb 2012, Erik Soosalu wrote:
> 1) Patch cables every 1' length from 3-10'
> 2) Velcro wrap
> 3) Tools (screwdrivers, etc)
>
> And since the racks usually come with the cage nuts, maybe the colo should just provide them.
they do? nonono, you have to buy those seperately :P
racks don't even come with "doors" and "side walls" etc by default *grin*
you have to buy them seperately anyway if you want to make sure your
company uses all the same ones, so you don't have to take them out again
and replace them because some fukkin idiot put the wrong size into the
hole as it "came with something else"
> >
> Thanks,
> Erik
>
> -----Original Message-----
> From: Jay Ashworth [mailto:jra@baylink.com]
> Sent: Friday, February 17, 2012 1:35 PM
> To: NANOG
> Subject: WW: Colo Vending Machine
>
> Please post your top 3 favorite components/parts you'd like to see in a
> vending machine at your colo; please be as specific as possible; don't
> let vendor specificity scare you off.
>
> Cheers,
> -- jra
> --
> Jay R. Ashworth Baylink jra@baylink.com
> Designer The Things I Think RFC 2100
> Ashworth & Associates http://baylink.pitas.com 2000 Land Rover DII
> St Petersburg FL USA http://photo.imageinc.us +1 727 647 1274
>
>
>
