[149608] in North American Network Operators' Group
RE: 10G switchrecommendaton
daemon@ATHENA.MIT.EDU (George Bonser)
Thu Feb 9 17:49:29 2012
From: George Bonser <gbonser@seven.com>
To: lincoln dale <ltd@interlink.com.au>
Date: Thu, 9 Feb 2012 22:48:31 +0000
In-Reply-To: <CAAUJCVP+eDV0A5yFM9nZfbmu9Cijv=MqXrkNj54SwurO4qqR4Q@mail.gmail.com>
Cc: nanog list <nanog@nanog.org>
Errors-To: nanog-bounces+nanog.discuss=bloom-picayune.mit.edu@nanog.org
Hi, Lincoln,
*sigh*
Ok, I see what happened. We just went through a software upgrade cycle on =
that unit and it got upgraded to the end of 4.6 instead of being upgraded t=
o the latest release version of EOS. Looks like another upgrade needs to be=
done, probably to 4.8.3
Thanks.
George
From: lincoln dale [mailto:ltd@interlink.com.au]
Sent: Thursday, February 09, 2012 1:47 PM
To: George Bonser
Cc: Leigh Porter; nanog list
Subject: Re: 10G switchrecommendaton
hi George,
IGMPv3 snooping has been supported since EOS 4.7. Its enabled by default i=
n EOS 4.8.x.
In terms of specifics, there is support for both IGMPv3 snooping & IGMPv3 q=
uerier. There isn't currently support for IGMPv3 snooping querier.
cheers,
lincoln.
On Fri, Feb 10, 2012 at 8:17 AM, George Bonser <gbonser@seven.com<mailto:gb=
onser@seven.com>> wrote:
Feb 9 07:42:21 SJC-AGS-01 IgmpSnooping: %IGMPSNOOPING-4-IGMPV3_UNSUPPORTED=
: IGMPv3 querier detected on interface Port-Channel1 (message repeated 34 t=
imes in 625.028 secs)
SJC-AGS-01#sho ver
Arista DCS-7124S-F
Hardware version: 06.02
Serial number: JSH10130054
System MAC address: 001c.7308.752f
Software image version: 4.6.4
Architecture: i386
Internal build version: 4.6.4-434606.EOS464
Sure, we can discuss it.
From: lincoln dale [mailto:ltd@interlink.com.au<mailto:ltd@interlink.com.au=
>]
Sent: Thursday, February 09, 2012 1:13 PM
To: George Bonser
Cc: Leigh Porter; nanog list
Subject: Re: 10G switchrecommendaton
On Fri, Feb 10, 2012 at 7:24 AM, George Bonser <gbonser@seven.com<mailto:gb=
onser@seven.com>> wrote:
It's pretty good gear. The only problem I've had with it is the limitation=
of IGMP not working on mLAG VLANs.
IGMP should work just fine with MLAG. IGMP state is sync'd between the MLA=
G pair. Happy to talk about this more off-list if you wish.
cheers,
lincoln.
(ltd@aristanetworks.com<mailto:ltd@aristanetworks.com>)
