[146365] in North American Network Operators' Group

home help back first fref pref prev next nref lref last post

Re: Anyone seen this kind of problem? SIP traffic not getting to

daemon@ATHENA.MIT.EDU (Jay Nakamura)
Wed Nov 9 22:33:56 2011

In-Reply-To: <CADs2+OE2VDVE_RaGE5R+=obYguHj0s8v4LokOhv7Bu0ayEbwXg@mail.gmail.com>
Date: Wed, 9 Nov 2011 22:33:44 -0500
From: Jay Nakamura <zeusdadog@gmail.com>
To: NANOG <nanog@nanog.org>
Errors-To: nanog-bounces+nanog.discuss=bloom-picayune.mit.edu@nanog.org

I just removed the route to our other provider and traffic is going
out Qwest again. The problem seems to be gone now.  As others had
similar problems during the same period using Qwest, it must have been
some strange issue with Qwest.

On Wed, Nov 9, 2011 at 1:47 PM, Jay Nakamura <zeusdadog@gmail.com> wrote:
> We ran into a strange situation yesterday that I am still trying to
> figure out. =A0We have many VoIP customers but yesterday suddenly select
> few of them couldn't reach the SIP provider's network from our
> network.
>
> I could traceroute to the SIP providers server from the affected
> clients' IP just fine. =A0I confirmed that the SIP traffic was leaving
> our network out the interface to the upstream provider and the SIP
> provider says they couldn't see the SIP traffic come into their border
> router.
>
> SIP traffic coming from SIP provider to the affected customer came
> through fine. =A0It's just Us -> SIP server was a problem.
>
> I thought there may be some strange BGP issue going on but we had
> other customers within the same /24 as the affected customers and they
> were connecting fine.
>
> The traffic at the time traversed
>
> Our network -> Qwest/century link -> Level 3 -> SIP provider
>
> I changed the routing around so it would go through our other
> upstream, AT&T, and it started working. =A0With AT&T, the route was
>
> Our network -> AT&T -> Level 3 -> SIP provider
>
> So my questions is, is it possible there is some kind of filter at
> Qwest or Level 3 that is dropping traffic only for udp 5060 for select
> few IPs? =A0That's the only explanation I can come up with other than
> the whole Juniper BGP issue 2 days ago left something in between in a
> strange state? =A0I read the post about XO doing filtering on transit
> traffic, I haven't seen anyone say Level 3 or Qwest is doing the same.
>


home help back first fref pref prev next nref lref last post