[140164] in North American Network Operators' Group

home help back first fref pref prev next nref lref last post

Re: OT: Server Cabinet

daemon@ATHENA.MIT.EDU (Randy Carpenter)
Wed May 4 09:17:01 2011

From: Randy Carpenter <rcarpen@network1.net>
In-Reply-To: <201105041258.p44Cwpif083198@aurora.sol.net>
Date: Wed, 04 May 2011 09:15:55 -0400 (EDT)
To: Joe Greco <jgreco@ns.sol.net>
Cc: "nanog@nanog.org" <nanog@nanog.org>
Errors-To: nanog-bounces+nanog.discuss=bloom-picayune.mit.edu@nanog.org

If you have a need for a 4-post rack, do not accomplish that by using 2 2-po=
st racks. You will likely find that rack rails that are designed for a 4-pos=
t rack will not fit.

Get an open-frame 4-post rack. It will come unassembled. It will also likely=
 be no more costly that 2 2-post racks.


-Randy

On May 4, 2011, at 8:59, Joe Greco <jgreco@ns.sol.net> wrote:

>>> Can you see where this is leading yet? Three obvious questions:
>>>=20
>>> 1) Have you ever had to fit a cabinet through a doorway that's too small=
?
>>> 2) How did you do it? Cut cabinet, demolish wall ...?
>>> 3) If you cut the cabinet, any tips?
>>=20
>> Comment:  you need to recognize that you are 'making trouble'.  At _some_=

>> point in the future, there will be a need to remove said cabinet from tha=
t
>> location, and the issue will rear it's ugly head *again*.
>>=20
>> Suggestion: If there is no alternative to that narrow doorway, consider:
>>   a) getting a *different* cabinet -- one that _will_ dis-assemble.
>>   b) if 'all else fails', _widen_ the doorway.  Thus permanently resolvin=
g
>>      the issue.
>>=20
>> Option (a) _is_ going to be less time/effort/money than any other alterna=
tive.
>=20
> Good comments so far.  I didn't see this one though:
>=20
> It's admittedly far from ideal in some ways, but a great way to deal
> with this sort of situation can be to get a pair of two-post open
> frame relay racks; most of them bolt together and can be put just
> about anywhere.  Many times we forget that these can be used as the=20
> front and back of a single rack.  Remember to tie them together if=20
> you go that route, attachment to a wall or up top highly recommended
> as well.
>=20
> Of course, this only works if you didn't really need doors on your
> rack, etc.
>=20
> ... JG
> --=20
> Joe Greco - sol.net Network Services - Milwaukee, WI - http://www.sol.net
> "We call it the 'one bite at the apple' rule. Give me one chance [and] the=
n I
> won't contact you again." - Direct Marketing Ass'n position on e-mail spam=
(CNN)
> With 24 million small businesses in the US alone, that's way too many appl=
es.
>=20
>=20


home help back first fref pref prev next nref lref last post