[13517] in North American Network Operators' Group
Re: How to use Cisco's NAT
daemon@ATHENA.MIT.EDU (Ron Buchalski)
Sun Nov 9 19:35:59 1997
From: "Ron Buchalski" <rbuchals@hotmail.com>
To: nanog@merit.edu, mdella@cstone.com
Date: Sun, 09 Nov 1997 16:25:52 PST
On Sun, 09 Nov 1997 14:51:17 Marcos Della wrote:
>Date: Sun, 09 Nov 1997 14:51:17 -0800
>To: nanog@merit.edu
>From: "Marcos Della" <mdella@cstone.com>
>Subject: How to use Cisco's NAT
>
>Does anyone know where there are some pointers on using the 11.2 NAT
stuff
>with Cisco? Also if it works worth anything? I've been searching cio
for
>some info, but so far no examples...
Marcos,
Check out:
11.2 Configuration Guide for NAT:
http://www.cisco.com/univercd/data/doc/software/11_2/cnp1/5cip.htm#REF30065
11.2 Command Reference:
http://www.cisco.com/univercd/data/doc/software/11_2/rnp1/5rip.htm
General Information and FAQ on NAT:
http://www.cisco.com/warp/public/458/41.html
>
>Also, does it work with 2501? Specifically I am working on setting up
Yes, NAT works on the 2501.
Regards,
Ron Buchalski
Ron Buchalski
SE, Cisco Systems
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
