[134933] in North American Network Operators' Group
daemon@ATHENA.MIT.EDU (Michael Ruiz)
Wed Jan 12 22:13:57 2011
Date: Wed, 12 Jan 2011 21:13:51 -0600
From: "Michael Ruiz" <mruiz@lstfinancial.com>
To: <nanog@nanog.org>
Errors-To: nanog-bounces+nanog.discuss=bloom-picayune.mit.edu@nanog.org
Hello all,
=20
I am having very unusual problem with the CSM. This is
what my problems. I have my active CSM setup for a Fault Tolerance
group with a priority of 100 and an alternate of 30 and set to preempt.
Now for some reason I cannot get the standby configure to get the
configuration from the Active. I did a debug and it appears the CSM on
the standby is deleting it's configuration and the active fails to sends
its configuration. So I know the Active is talking across the VLAN I
have created for this purpose. I can see the information coming up on
my debug from both ends. Below is my configuration. Any help on this
is appreciated. Thank you in advance.=20
=20
DR01.SNATXDC1# show module csm 8 ft detail=20
FT group 2, vlan 45
This box is active
Configuration is out-of-sync
priority 100, heartbeat 1, failover 3, preemption is on
alternate priority 30
total buffer count 6214, illegal state transitions 0
receive buffers not committed 0, send buffers not committed 0
updates: sent 4, received 0, committed 0
coup msgs: sent 0, received 0
election msgs: sent 0, received 2
heartbeat msgs: sent 1057, received 594
relinquish msgs: sent 0, received 0
conn replicate msgs: sent 462, received 0
conn refresh msgs: sent 462, received 0
conn reset msgs: sent 61, received 0
conn redundancy errors: msgs lost 0, msgs rejected 0
packets: total received 0, total dropped 0, duplicates 0
checksum failed 0, dumped 0, buffer unavailable 0
number of state updates in last 8 transfers:
0 0 0 0 0 0 0 0=20
Critical device and interface tracking:
=20
=20
DR01.SNATXDC1#
=20
DR02.SNATXDC1#show module csm 8 ft detail=20
FT group 2, vlan 45
This box is in standby state
Configuration is out-of-sync
priority 10, heartbeat 1, failover 3, preemption is off
total buffer count 6214, illegal state transitions 10
receive buffers not committed 0, send buffers not committed 0
updates: sent 4, received 0, committed 0
coup msgs: sent 0, received 0
election msgs: sent 2, received 0
heartbeat msgs: sent 0, received 984
relinquish msgs: sent 0, received 0
conn replicate msgs: sent 0, received 0
conn refresh msgs: sent 0, received 0
conn reset msgs: sent 0, received 0
conn redundancy errors: msgs lost 0, msgs rejected 0
packets: total received 5056012, total dropped 0, duplicates 0
checksum failed 0, dumped 0, buffer unavailable 0
number of state updates in last 8 transfers:
0 0 0 0 0 0 0 0=20
Critical device and interface tracking:
=20
=20
DR02.SNATXDC1#
=20
!
ft group 2 vlan 45=20
priority 100 alt 30
preempt
=20
=20
=20
DR02.SNATXDC1#show run module 8
Building configuration...
=20
Current configuration : 5 bytes
end
=20
DR02.SNATXDC1#????
=20
=20
M.A.R
=20
