[132170] in North American Network Operators' Group
RE: Cisco 6500 QoS Priority Queuing (DSCP & EXP based)
daemon@ATHENA.MIT.EDU (Rampley Jr, Jim F)
Wed Nov 17 10:38:34 2010
From: "Rampley Jr, Jim F" <jim.rampley@chartercom.com>
To: Manu Chao <linux.yahoo@gmail.com>, NANOG list <nanog@nanog.org>
Date: Wed, 17 Nov 2010 09:36:12 -0600
In-Reply-To: <AANLkTi=XpSx6Sc3g=_kR9UBrkba2PGtAnwfu50+r-t6-@mail.gmail.com>
Errors-To: nanog-bounces+nanog.discuss=bloom-picayune.mit.edu@nanog.org
This depends on which line cards you have in your chassis. This configurat=
ion below won't work on 6700 series line cards. You have to use the wrr co=
mmands. I didn't test it, but MQC configuration below should work on ES se=
ries line cards.
Jim=20
-----Original Message-----
From: Manu Chao [mailto:linux.yahoo@gmail.com]=20
Sent: Wednesday, November 17, 2010 9:11 AM
To: NANOG list
Subject: Cisco 6500 QoS Priority Queuing (DSCP & EXP based)
I would to translate following 7200 QoS configuration to Catalyst 6500:
class-map match-any PQ
match dscp ef
match mpls experimental topmost 5
policy-map QOS-PE-OUT
class PQ
priority percent 33
class class-default
AFAIK we need extra command on 6500 to enable Priority Queuing at the
interface level but my problem is that interface priority command are only
COS based not DSCP nor EXP. I may be wrong.
I would appreciate any 6500 QoS help.
Thanks in advance
E-MAIL CONFIDENTIALITY NOTICE:=20
=20
=20
=20
The contents of this e-mail message and=20
any attachments are intended solely for the=20
addressee(s) and may contain confidential=20
and/or legally privileged information. If you=20
are not the intended recipient of this message=20
or if this message has been addressed to you=20
in error, please immediately alert the sender
by reply e-mail and then delete this message=20
and any attachments. If you are not the=20
intended recipient, you are notified that=20
any use, dissemination, distribution, copying,=20
or storage of this message or any attachment=20
is strictly prohibited.
