[116807] in North American Network Operators' Group
Re: F5/Cisco catalyst configuration question
daemon@ATHENA.MIT.EDU (Darren Bolding)
Wed Aug 19 20:58:28 2009
In-Reply-To: <7CC9F803BE7E0644A6219521B951AE380478D4F186@s003mb01.staff.iaccap.com>
Date: Wed, 19 Aug 2009 17:58:04 -0700
From: Darren Bolding <darren@bolding.org>
To: Christopher Greves <Christopher.Greves@mindspark.com>
Cc: "nanog@nanog.org" <nanog@nanog.org>
Errors-To: nanog-bounces+nanog.discuss=bloom-picayune.mit.edu@nanog.org
What model BIG-IP?
On some models I have had to set the BIG-IP's or the 6500 (can't remember
which) to specified speed/duplex and the other side to auto.
I believe it was auto on the BIG-IP and fixed on the 6500.
Setting both sides the same did not work.
On Wed, Aug 19, 2009 at 10:41 AM, Christopher Greves <
Christopher.Greves@mindspark.com> wrote:
> Scott,
>
> We've had issues in the past with IOS 6500's auto-negotiating uplink ports
> with an LTM into ISL Trunk mode. This only occurred when we had the port on
> the LTM configured as a tagged interface. It was easily solved by forcing
> the port on the 6500 into dot1q encapsulation. I'm not sure this necessarily
> explains why you aren't seeing a link light on the LTM though. I can't
> remember what the interface status was on both sides. This does correlate to
> why it's working on the 2950's as they don't support ISL and would likely
> negotiate into dot1q.
>
> Chris
>
>
> Christopher Greves | Senior Systems Engineer
> One North Lexington Ave, 9th Floor - White Plains, NY 10601
> T 914-826-2067 | C 914.420.8340 | E christopher.greves@mindspark.com
>
> Mindspark Interactive Network, Inc. is an IAC company.
>
>
>
> -----Original Message-----
> From: Scott Spencer [mailto:scott@dwc-computer.com]
> Sent: Wednesday, August 19, 2009 1:13 PM
> To: nanog@nanog.org
> Subject: F5/Cisco catalyst configuration question
>
> Trying to link an F5 Local Traffic Manager with a Cisco Catalyst 6500 ,
> have
> matched ports (speed,duplex ect..) but no link light at all on the F5. Does
> link with a Cisco 2950 switch in between but I need a direct connection
> with
> the 6500.
>
> Any suggestions what to try?
>
> Best regards,
>
> Scott Spencer
> Data Center Asset Recovery/Remarketing Manager
> Duane Whitlow & Co. Inc.
> Nationwide Toll Free: 800.977.7473. Direct: 972.865.1395 Fax:
> 972.931.3340
> <mailto:scott@dwc-computer.com> scott@dwc-computer.com
> <http://www.dwc-it.com/> www.dwc-it.com
> Cisco/Juniper/F5/Foundry/Brocade/Sun/IBM/Dell/Liebert and more ~
>
>
>
--
-- Darren Bolding --
-- darren@bolding.org --
