[111769] in North American Network Operators' Group
Re: J-series and Cisco ME3400 L2 Issues
daemon@ATHENA.MIT.EDU (Chuck Anderson)
Thu Feb 12 07:19:42 2009
Date: Thu, 12 Feb 2009 07:19:27 -0500
From: Chuck Anderson <cra@WPI.EDU>
To: nanog@nanog.org
Mail-Followup-To: nanog@nanog.org
In-Reply-To: <D5FFABED-7ACE-4040-82AF-95546EBF3243@kanren.net>
Errors-To: nanog-bounces@nanog.org
On Wed, Feb 11, 2009 at 11:57:01AM -0600, Brad Fleming wrote:
> We've seen a problem getting Layer2 to function correctly with various
> speed and duplex settings. We tried every combo of hardcoded settings on
> both sides but simply couldn't resolve some L2 errors and interface
> resets. In the end, we found a stable setup with the J-series set to
> auto/auto and the ME3400 set to 100/full.
What were the L2 errors? You might try asking your question on the
juniper-nsp [1] and cisco-nsp [2] lists.
[1] http://puck.nether.net/mailman/listinfo/juniper-nsp
[2] http://puck.nether.net/mailman/listinfo/cisco-nsp
