[107362] in North American Network Operators' Group
Re: BGP Scalability Simulation
daemon@ATHENA.MIT.EDU (Moazzam Khan)
Tue Sep 2 13:43:38 2008
Date: Tue, 2 Sep 2008 13:43:28 -0400
From: "Moazzam Khan" <emoazzam@gmail.com>
To: "Ricardo Oliveira" <rveloso@cs.ucla.edu>
In-Reply-To: <E8C58E72-0732-4E1B-88A2-BCA762A9417E@cs.ucla.edu>
Cc: nanog@nanog.org
Errors-To: nanog-bounces@nanog.org
Hi Ricardo,
Basically I want to measure the Convergence times and routing table sizes.
But I am not able to find a good topology of internet which I can utilize
for my experimentations. I am looking at GT-ITM, BRITE and IGen but don't
know what kind of abstraction they provide and if these topologies are
feasible to test the above mentioned parameters.
What challenges I can face if I want to measure all those parameters
convergence times ,table sizes , update count, signal sizes etc.
Regards
Moazzam
On Tue, Sep 2, 2008 at 1:35 PM, Ricardo Oliveira <rveloso@cs.ucla.edu>wrote:
> Moazzam,
>
> Do you have something specific in mind you want to measure? e.g.
> convergence times, table size, update count, etc? the scope of your study
> seems to broad as you describe it..
> Cheers,
>
> --Ricardo
>
>
> On Sep 1, 2008, at 12:57 PM, Moazzam Khan wrote:
>
> Thanks Stefan for your reply.
>>
>> Basically the goal of this testing is to study the BGP scalability issues
>> in
>> the internet sometime in future lets say 10 years from now and try to find
>> out what problems it could face . I am trying to use ns2 as my simulation
>> environment.
>>
>> Can you suggest how I can set up the envrionment for this kind of study
>> and
>> what parameters should I try to caputre.
>>
>> Regards
>> MAK
>>
>> On Mon, Sep 1, 2008 at 3:51 PM, Fouant, Stefan <Stefan.Fouant@neustar.biz
>> >wrote:
>>
>> Topology and setup of these kinds of tests largely depend on whether you
>>> are testing iBGP or eBGP. In my experience, eBGP testing is fairly
>>> straight
>>> forward as you are almost always testing reconvergence of the BGP
>>> next-hop.
>>> iBGP testing scenarios on the other hand can be quite a bit more complex
>>> as
>>> you may also be testing the reconvergence of the underlying IGP if the
>>> BGP
>>> next-hop remains unchanged. Can you describe your testing goals and
>>> environment in a bit more detail?
>>>
>>> Stefan Fouant
>>> Principal Network Engineer
>>> NeuStar, Inc. - http://www.neustar.biz
>>> GPG Key ID: 0xB5E3803D
>>>
>>>
>>> ----- Original Message -----
>>> From: Moazzam Khan <emoazzam@gmail.com>
>>> To: nanog@nanog.org <nanog@nanog.org>
>>> Sent: Mon Sep 01 15:37:19 2008
>>> Subject: BGP Scalability Simulation
>>>
>>> Hi
>>>
>>> I am trying to simulate BGP for scalability testing. I have few queries.
>>>
>>>
>>> 1) What sort of topology I should try out ?
>>>
>>> 2) What parameters should I test?
>>>
>>> I am trying to simulate it in ns-2 and i would appreciate reply from you
>>> guys.
>>>
>>> Regards
>>>
>>> MAK
>>>
>>>
>
>
