[9347] in linux-scsi channel archive
ncr53c8xx: Problems on Alpha w/ 2.4.0-test6-final
daemon@ATHENA.MIT.EDU (Jan-Benedict Glaw)
Fri Aug 11 05:39:54 2000
Date: Fri, 11 Aug 2000 11:38:47 +0200
From: Jan-Benedict Glaw <jbglaw@lug-owl.de>
To: linux-scsi@vger.rutgers.edu
Message-ID: <20000811113847.A31394@lug-owl.de>
Reply-To: jbglaw@lug-owl.de
Mail-Followup-To: linux-scsi@vger.rutgers.edu
Mime-Version: 1.0
Content-Type: multipart/signed; micalg=pgp-md5;
protocol="application/pgp-signature"; boundary="+HP7ph2BbKc20aGI"
--+HP7ph2BbKc20aGI
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
Hi!
2.4.0-test6-final can't correctly deal with 2 NCR53c810 SCSI cards
(one onboard, one as a PCI card) on my old Alpha (AXPpci33):
-------------------- 2.4.0-test6-final ---------------
ncr53c8xx: at PCI bus 0, device 6, function 0
ncr53c8xx: 53c810 detected
ncr53c8xx: at PCI bus 0, device 8, function 0
ncr53c8xx: 53c810 detected
ncr53c810-0: rev 0x1 on pci bus 0 device 6 function 0 irq 11
ncr52c810-0: ID 7, Fast-10, Parity Checking
CACHE TEST FAILED: host wrote 1, ncr read 1610596373.
CACHE TEST FAILED: ncr wrote 2, host read 1.=20
CACHE TEST FAILED: ncr wrote 2, read back 1610596372.
CACHE INCORRECTLY CONFIGURED.
ncr53c810-0: detaching...
ncr53c810-0: rev 0x2 on pci bus 0 device 8 function 0 irq 10
ncr53c810-0: ID 7, Fast-10, Parity Checking
CACHE TEST FAILED: script execution failed.=20
start=3D402c9414, pc=3D402c942c, end=3D402c9440
CACHE INCORRECTLY CONFIGURED.
ncr52c810-0: detaching...
scsi : 0 hosts.
scsi : detected total.
------------------------------------------------------
My ./linux/.config:
[jbglaw@air:/usr/src/linux] $> grep NCR .config
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
CONFIG_SCSI_NCR53C8XX=3Dy
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=3D8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=3D32
CONFIG_SCSI_NCR53C8XX_SYNC=3D20
CONFIG_SCSI_NCR53C8XX_PROFILE=3Dy
CONFIG_SCSI_NCR53C8XX_IOMAPPED=3Dy
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
However, last tested kernel (2.4.09-test6-pre1) was fine:
[jbglaw@air:/proc/scsi/ncr53c8xx] $> cat 0
Chip NCR53C810, device id 0x1, revision id 0x1
On PCI bus 0, device 6, function 0, IRQ 11
Synchronous period factor 25, max commands per lun 32
Debug flags 0x200, verbosity level 1
Profiling information:
num_trans =3D 2051
num_kbytes =3D 33968
num_disc =3D 2501
num_break =3D 96
num_int =3D 105
num_fly =3D 2114
ms_setup =3D 370
ms_data =3D 18102
ms_disc =3D 16516
ms_post =3D 346
[jbglaw@air:/proc/scsi/ncr53c8xx] $> cat 1
Chip NCR53C810, device id 0x1, revision id 0x2
On PCI bus 0, device 8, function 0, IRQ 10
Synchronous period factor 25, max commands per lun 32
Debug flags 0x200, verbosity level 1
Profiling information:
num_trans =3D 42
num_kbytes =3D 10
num_disc =3D 14
num_break =3D 21
num_int =3D 34
num_fly =3D 42
ms_setup =3D 32
ms_data =3D 363
ms_disc =3D 190
ms_post =3D 3
Any ideas?
--=20
Fehler eingestehen, Gr=F6=DFe zeigen: Nehmt die Rechtschreibreform zur=FCck=
!!!
/* Jan-Benedict Glaw <jbglaw@lug-owl.de> -- +49-177-5601720 */
keyID=3D0x8399E1BB fingerprint=3D250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 83=
99 E1BB
"insmod vi.o and there we go..." (Alexander Viro on linux-kernel)
--+HP7ph2BbKc20aGI
Content-Type: application/pgp-signature
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.1 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iEYEAREBAAYFAjmTyacACgkQHb1edYOZ4btd0gCfQ4lYoHyGm6dQ45fTF1DBlNIu
J9UAnRWmAAfdocJ/j4i1nTgWd6TeQzWK
=PvyF
-----END PGP SIGNATURE-----
--+HP7ph2BbKc20aGI--
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
