[9014] in linux-scsi channel archive
Re: SCSI Errors with 2940U2W gone with Mandrake 7.1
daemon@ATHENA.MIT.EDU (Brian Leeper)
Sun Jun 18 23:48:10 2000
Date: Sun, 18 Jun 2000 22:58:20 -0400 (EDT)
From: Brian Leeper <qaz@doubled.com>
To: "John J. LeMay Jr." <jlemay@njmc.com>
Cc: linux-scsi@vger.rutgers.edu
In-Reply-To: <200006190245.WAA16721@gambit.njmc.com>
Message-ID: <Pine.LNX.3.93.1000618225005.126A-100000@darkstar>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
On Sun, 18 Jun 2000, John J. LeMay Jr. wrote:
> For weeks I have been plagued with errors when trying to install Linux
> on my new machine with it's Adaptec 2940U2W and Seagate LVD drives.
> Previously I would receive errors such as:
Were these Seagate LVD drives the 160MB/s-capable drives?
If so, I had the same problem with the on-board Adaptec controller on the
Intel 440GX motherboard, which went away with kernel 2.2.16. I only tried
Seagate drives, but I think the problem will happen with any
160MB/s-capable drive. Adding a 160MB/s drive to an existing working
system will cause this trouble as well. Upgrade the kernel (or just the
Adaptec driver) first, then install the drive.
Brian
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
