[8424] in linux-scsi channel archive
ncr53c8...
daemon@ATHENA.MIT.EDU (Linda Walsh)
Mon Mar 20 14:05:49 2000
Message-ID: <38D655FB.42697BDF@sgi.com>
Date: Mon, 20 Mar 2000 08:46:51 -0800
From: Linda Walsh <law@sgi.com>
MIME-Version: 1.0
To: linux-scsi@vger.rutgers.edu
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
I have another machine that has three ncr controllers:
---
ncr53c8xx: at PCI bus 0, device 8, function 0
ncr53c8xx: 53c810a detected
ncr53c8xx: at PCI bus 1, device 3, function 0
ncr53c8xx: 53c896 detected
ncr53c8xx: at PCI bus 1, device 3, function 1
ncr53c8xx: 53c896 detected
ncr53c810a-0: rev=0x23, base=0xfa101000, io_port=0x2000, irq=58
ncr53c810a-0: ID 7, Fast-10, Parity Checking
ncr53c810a-0: restart (scsi reset).
ncr53c896-1: rev=0x01, base=0xfe004000, io_port=0x3000, irq=57
ncr53c896-1: ID 7, Fast-40, Parity Checking
ncr53c896-1: on-chip RAM at 0xfe000000
ncr53c896-1: restart (scsi reset).
ncr53c896-1: Downloading SCSI SCRIPTS.
ncr53c896-2: rev=0x01, base=0xfe004400, io_port=0x3400, irq=56
ncr53c896-2: ID 7, Fast-40, Parity Checking
ncr53c896-2: on-chip RAM at 0xfe002000
ncr53c896-2: restart (scsi reset).
ncr53c896-2: Downloading SCSI SCRIPTS.
scsi0 : ncr53c8xx - version 3.2a-2
scsi1 : ncr53c8xx - version 3.2a-2
scsi2 : ncr53c8xx - version 3.2a-2
--------
When I use a initrd, I get the above and it works fine. But
if I try to compile the module into the kernel (not as a module), it only
finds the first controller (and thusly does not boot).
Can anyone suggest why it works as a module but not compiled
in? I wanted to dump the initrd process, BTW, which is why I want to
compile it in.
Thanks,
-linda
--
Linda A Walsh | Trust Technology, Core Linux, SGI
law@sgi.com | Voice: (650) 933-5338
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
