[840] in linux-scsi channel archive
NCR Problems
daemon@ATHENA.MIT.EDU (Randolf Skerka)
Wed Oct 23 08:13:43 1996
From: Randolf Skerka <Randolf.Skerka@heim2.tu-clausthal.de>
To: linux-scsi@vger.rutgers.edu
Date: Wed, 23 Oct 1996 14:07:37 +0200 (MET DST)
Sorry, I'm new on this list. If this question was already answered send me a
note.
My System :
- P133, 32MB
- scsi-ncr53c7,8xx : at PCI bus 0, device 10, function 0
scsi-ncr53c7,8xx : NCR53c810 at memory 0xfbfe0000, io 0xe400, irq 10
- Vendor: NEC Model: D3845 Rev: 0307 [Id 0]
Vendor: QUANTUM Model: LP240S GM240S01X Rev: 4.6 [Id 1]
Vendor: IBM Model: DORS-32160 Rev: WA6A [Id 2]
Vendor: SANYO Model: CRD-250S Rev: 1.16 [Id 3]
Vendor: IMS Model: CDD2000/00 Rev: 1.26 [Id 4]
Vendor: HP Model: HP35470A Rev: 1109 [Id 5]
- Linux 2.0.21
Ok, I get [sometimes!] horrible messages if i try to :
- burn a CD on my CDR (Philips CDD2000)
- Copy something from my CD-ROM (Sanyo CDR??) to my DAT-Streamer (HP35470A)
I've tried to disable "Disconnect/Reconnect" in the Kernel options, but it
don't work better.
Ok, here are the messages :
CDR-Problems :
++++++++++++++
kernel: SCSI disk error : host 0 channel 0 id 6 lun 0 return code = 25040000
kernel: scsidisk I/O error: dev 08:20, sector 0
kernel: scsi : aborting command due to timeout : pid 183925, scsi0, channel 0, id 0, lun 0 Write (6) 04 27 f1 02 00
kernel: scsi0 : DANGER : command running, can not abort.
kernel: scsi : aborting command due to timeout : pid 183926, scsi0, channel 0, id 0, lun 0 Write (6) 04 67 e9 02 00
kernel: scsi0 : found command 183926 in Linux issue queue
kernel: scsi : aborting command due to timeout : pid 183927, scsi0, channel 0, id 0, lun 0 Write (6) 04 67 f5 02 00
kernel: scsi0 : found command 183927 in Linux issue queue
kernel: scsi : aborting command due to timeout : pid 183925, scsi0, channel 0, id 0, lun 0 Write (6) 04 27 f1 02 00
kernel: scsi0 : DANGER : command running, can not abort.
kernel: SCSI host 0 abort (pid 183925) timed out - resetting
kernel: SCSI bus is being reset for host 0 channel 0.
kernel: scsi0 : DCMD|DBC=0x860b0000, DNAD=0xfec814 (virt 0x00fec814)
kernel: DSA=0x6781e8 (virt 0x006781e8)
kernel: DSPS=0xfec814, TEMP=0x6780ac (virt 0x006780ac), DMODE=0x88
kernel: SXFER=0x8, SCNTL3=0x13
kernel: BSY REQ phase=MSGIN, 0 bytes in SCSI FIFO
kernel: STEST0=0x6
kernel: scsi0 : DSP 0xfec80c (virt 0x00fec80c) ->
kernel: 0xfec80c (virt 0x00fec80c) : 0x860b0000 0x00fec814 (virt 0x00fec814)
kernel: 0xfec814 (virt 0x00fec814) : 0x1e000000 0x00000040 (virt 0x00000040)
kernel: 0xfec81c (virt 0x00fec81c) : 0x90080000 0x00000000 (virt 0x00000000)
kernel: 0xfec824 (virt 0x00fec824) : 0x820b0000 0x00fec844 (virt 0x00fec844)
kernel: 0xfec82c (virt 0x00fec82c) : 0x9f030000 0x00000000 (virt 0x00000000)
kernel: 0xfec834 (virt 0x00fec834) : 0x8f0b0000 0x00feca04 (virt 0x00feca04)
kernel: scsi0 : connected (SDID=0x6, SSID=0x80)
kernel: scsi0 : dsa at phys 0x6781e8 (virt 0x006781e8)
kernel: + 64 : dsa_msgout length = 1, data = 0x67802c (virt 0x0067802c)
kernel: Identify disconnect allowed lun 0
kernel: + 60 : select_indirect = 0x13060800
kernel: + 56 : dsa_cmnd = 0x18dfc result = 0x25040000, target = 6, lun = 0, cmd = Read (6) 00 00 00 02 00
kernel: + 48 : dsa_next = 0x0
kernel: scsi0 target 6 : sxfer_sanity = 0x8, scntl3_sanity = 0x13
kernel: script : 0x78031300 0x0 0x78050800 0x0 0x90080000 0x0 0x0 0x0
kernel: scsi0 : issue queue
kernel: scsi0 : dsa at phys 0xfc8080 (virt 0x00fc8080)
kernel: + 64 : dsa_msgout length = 16696804, data = 0x0 (virt 0x00000000)
kernel: + 60 : select_indirect = 0xc0000004
kernel: + 56 : dsa_cmnd = 0x0
kernel: + 48 : dsa_next = 0x0
kernel: scsi0 : dsa at phys 0xfca080 (virt 0x00fca080)
kernel: + 64 : dsa_msgout length = 16696804, data = 0x0 (virt 0x00000000)
kernel: + 60 : select_indirect = 0xc0000004
kernel: + 56 : dsa_cmnd = 0x0
kernel: + 48 : dsa_next = 0x0
kernel: scsi0 : schedule dsa array :
kernel: scsi0 : end schedule dsa array
kernel: scsi0 : reconnect_dsa_head :
kernel: scsi0 : dsa at phys 0x5f21e8 (virt 0x005f21e8)
kernel: + 64 : dsa_msgout length = 1, data = 0x5f202c (virt 0x005f202c)
kernel: Identify disconnect allowed lun 0
kernel: + 60 : select_indirect = 0x13000800
kernel: + 56 : dsa_cmnd = 0x89c00 result = 0xffff, target = 0, lun = 0, cmd = Write (6) 04 27 f1 02 00
kernel: + 48 : dsa_next = 0x0
kernel: scsi0 target 0 : sxfer_sanity = 0x8, scntl3_sanity = 0x13
kernel: script : 0x78031300 0x0 0x78050800 0x0 0x90080000 0x0 0x0 0x0
kernel: scsi0 : can't determine saved data pointer offset
kernel: 0xfec9bc (virt 0x00fec9bc) : 0x9e0b0000 0x00000000 (virt 0x00000000)
kernel: 0xfec9c4 (virt 0x00fec9c4) : 0x980b0000 0x00000000 (virt 0x00000000)
kernel: scsi0 : can't determine active data pointer offset
kernel: 0xfec9bc (virt 0x00fec9bc) : 0x9e0b0000 0x00000000 (virt 0x00000000)
kernel: 0xfec9c4 (virt 0x00fec9c4) : 0x980b0000 0x00000000 (virt 0x00000000)
kernel: scsi0 : end reconnect_dsa_head
kernel: The sti() implicit in a printk() prevents hangs
kernel: scsi : aborting command due to timeout : pid 183926, scsi0, channel 0, id 0, lun 0 Write (6) 04 67 e9 02 00
kernel: scsi0 : did this command ever run?
kernel: scsi0 : target 0 accepting period 100ns offset 8 10.00MHz FAST SCSI-II
kernel: scsi0 : setting target 0 to period 100ns offset 8 10.00MHz FAST SCSI-II
kernel: scsi : aborting command due to timeout : pid 183927, scsi0, channel 0, id 0, lun 0 Write (6) 04 67 f5 02 00
kernel: scsi0 : did this command ever run?
DAT-Problems :
++++++++++++++
kernel: Detected scsi tape st0 at scsi0, channel 0, id 6, lun 0
kernel: scsi : aborting command due to timeout : pid 6814, scsi0, channel 0, id 0, lun 0 Write (6) 04 a1 fb 02 00
kernel: scsi0 : DANGER : command running, can not abort.
kernel: scsi : aborting command due to timeout : pid 6815, scsi0, channel 0, id 0, lun 0 Read (6) 04 a6 0b 02 00
kernel: scsi0 : found command 6815 in Linux issue queue
kernel: scsi : aborting command due to timeout : pid 6812, scsi0, channel 0, id 3, lun 0 Read (6) 00 1d 55 26 00
kernel: scsi0 : DANGER : command running, can not abort.
kernel: scsi : aborting command due to timeout : pid 6814, scsi0, channel 0, id 0, lun 0 Write (6) 04 a1 fb 02 00
kernel: scsi0 : DANGER : command running, can not abort.
kernel: SCSI host 0 abort (pid 6814) timed out - resetting
kernel: SCSI bus is being reset for host 0 channel 0.
kernel: scsi0 : DCMD|DBC=0x820b0000, DNAD=0x8482c (virt 0x0008482c)
kernel: DSA=0x10ae1e8 (virt 0x010ae1e8)
kernel: DSPS=0x84844, TEMP=0x10ae0ac (virt 0x010ae0ac), DMODE=0x88
kernel: SXFER=0x0, SCNTL3=0x3
kernel: BSY phase=MSGOUT, 0 bytes in SCSI FIFO
kernel: STEST0=0x7
kernel: scsi0 : DSP 0x84824 (virt 0x00084824) ->
kernel: 0x84824 (virt 0x00084824) : 0x820b0000 0x00084844 (virt 0x00084844)
kernel: 0x8482c (virt 0x0008482c) : 0x9f030000 0x00000000 (virt 0x00000000)
kernel: 0x84834 (virt 0x00084834) : 0x8f0b0000 0x00084a04 (virt 0x00084a04)
kernel: 0x8483c (virt 0x0008483c) : 0x870b0000 0x00084834 (virt 0x00084834)
kernel: 0x84844 (virt 0x00084844) : 0x9a030000 0x00000000 (virt 0x00000000)
kernel: 0x8484c (virt 0x0008484c) : 0x1a000000 0x00000048 (virt 0x00000048)
kernel: scsi0 : connected (SDID=0x3, SSID=0x83)
kernel: scsi0 : dsa at phys 0x10ae1e8 (virt 0x010ae1e8)
kernel: + 64 : dsa_msgout length = 1, data = 0x10ae02c (virt 0x010ae02c)
kernel: Identify disconnect allowed lun 0
kernel: + 60 : select_indirect = 0x3030000
kernel: + 56 : dsa_cmnd = 0x108e214 result = 0xffff, target = 3, lun = 0, cmd = Read (6) 00 1d 55 26 00
kernel: + 48 : dsa_next = 0x0
kernel: scsi0 target 3 : sxfer_sanity = 0x0, scntl3_sanity = 0x3
kernel: script : 0x78030300 0x0 0x78050000 0x0 0x90080000 0x0 0x0 0x0
kernel: scsi0 : saved data pointer at offset 0
kernel: scsi0 : can't determine active data pointer offset
kernel: 0x84854 (virt 0x00084854) : 0x820b0000 0x0008484c (virt 0x0008484c)
kernel: 0x8485c (virt 0x0008485c) : 0x8f0b0000 0x00084a04 (virt 0x00084a04)
kernel: scsi0 : issue queue
kernel: scsi0 : dsa at phys 0x1ff8080 (virt 0x01ff8080)
kernel: + 64 : dsa_msgout length = 542180, data = 0x0 (virt 0x00000000)
kernel: + 60 : select_indirect = 0xc0000004
kernel: + 56 : dsa_cmnd = 0x0
kernel: + 48 : dsa_next = 0x0
kernel: scsi0 : dsa at phys 0x100e080 (virt 0x0100e080)
kernel: + 64 : dsa_msgout length = 542180, data = 0x0 (virt 0x00000000)
kernel: + 60 : select_indirect = 0xc0000004
kernel: + 56 : dsa_cmnd = 0x0
kernel: + 48 : dsa_next = 0x0
kernel: scsi0 : schedule dsa array :
kernel: scsi0 : dsa at phys 0x10fa080 (virt 0x010fa080)
kernel: + 64 : dsa_msgout length = 542180, data = 0x86218 (virt 0x00086218)
kernel: + 60 : select_indirect = 0xc0000004
kernel: + 56 : dsa_cmnd = 0x0
kernel: + 48 : dsa_next = 0x0
kernel: scsi0 : dsa at phys 0x1108080 (virt 0x01108080)
kernel: + 64 : dsa_msgout length = 542180, data = 0x86220 (virt 0x00086220)
kernel: + 60 : select_indirect = 0xc0000004
kernel: + 56 : dsa_cmnd = 0x0
kernel: + 48 : dsa_next = 0x0
kernel: scsi0 : end schedule dsa array
kernel: scsi0 : reconnect_dsa_head :
kernel: scsi0 : end reconnect_dsa_head
kernel: The sti() implicit in a printk() prevents hangs
kernel: scsi : aborting command due to timeout : pid 6816, scsi0, channel 0, id 0, lun 0 Read (6) 05 08 a7 02 00
kernel: scsi0 : did this command ever run?
kernel: scsi0 : target 0 accepting period 100ns offset 8 10.00MHz FAST SCSI-II
kernel: scsi0 : setting target 0 to period 100ns offset 8 10.00MHz FAST SCSI-II
kernel: scsi : aborting command due to timeout : pid 6812, scsi0, channel 0, id 3, lun 0 Read (6) 00 1d 55 26 00
kernel: scsi0 : did this command ever run?
kernel: scsi : aborting command due to timeout : pid 6815, scsi0, channel 0, id 0, lun 0 Read (6) 04 a6 0b 02 00
kernel: scsi0 : did this command ever run?
kernel: scsi0 : target 3 rejected SDTR
kernel: scsi0 : setting target 3 to asynchronous SCSI
kernel: CD-ROM I/O error: dev 0b:00, sector 30036
-- Randolf
+-------------------------------------------------------------------------+
| Randolf Skerka http://www.heim2.tu-clausthal.de/~randolf |
| Tel./Fax. ++49-5323-78140 Randolf.Skerka@heim2.tu-clausthal.de |
+-------------= Randi ... that's the name of my little sister =-----------+
