[8386] in linux-scsi channel archive
Re: Timeouts on ncr53c895
daemon@ATHENA.MIT.EDU (Kai Harrekilde-Petersen)
Fri Mar 17 09:11:54 2000
Reply-To: <kai.harrekilde-petersen@exbit.dk>
From: "Kai Harrekilde-Petersen" <kai.harrekilde-petersen@exbit.dk>
To: <linux-scsi@vger.rutgers.edu>
Cc: "'Karl B. Hammar'" <karl@kalle.csb.ki.se>
Date: Fri, 17 Mar 2000 08:43:58 +0100
Message-ID: <001401bf8fe4$8ea8b600$7401a8c0@exbittechnology.com>
MIME-Version: 1.0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
In-Reply-To: <20000316215711A.karl@kalle.csb.ki.se>
Karl wrote:
> I use a similar setup in the boxes I sell, DC390U2B, IBM DMVS09V.
> The harddisk is without a terminator, and I strongly believe yours
> don't have it either. Are you sure about the DMVS36G, shouldn't
> it be a D at the end.
You're right, it's DMVS36D.
WRT terminator: Yes, I have an LVD/SE terminator at the end of the
cable (it's a relatively largish black box).
> Please check that first before you dwelve inte further debuggin.
> One thing you could do is to enter the scsi bios (F2 at boot) and
> verify the disk (it is nondestructive, verify that the scan start
> at block 0).
I verified the disk yesterday before receiving your mail. It did
start from block zero, and it went all the way through.
Thanks for your suggestions,
Kai
--
Kai Harrekilde-Petersen
Exbit Technology A/S
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
