[826] in linux-scsi channel archive
No subject found in mail header
daemon@ATHENA.MIT.EDU (yuri mironoff)
Mon Oct 21 18:34:52 1996
Date: Mon, 21 Oct 1996 11:28:48 -0400 (EDT)
From: yuri mironoff <yuri@rgti.com>
To: linux-scsi@vger.rutgers.edu
Hello!
Does anyone have an Advansys ABP940 controller working with the 2.0.x
series kernels? I've been trying a combination of 2.0.22 and driver v1.8
with no success. The driver fails to initialize (detect?) the board
properly. It finds the io port at 0xd700, Bios at 0 (?!?) but no devices
atached.The redhat3 boot disk I downloaded from the advansys FTP site
(kernel 1.2.13 & driver v1.3) sortof works - the driver detects the
board: io port at 0xd700, Bios at C000, and all the devices. However, this
combination issues an 'unknown warning 40' message and I get timeouts
across the SCSI bus unless I set the transfer speed to 5mb/s (or slower)
on the devices. Any ideas???
My system: Supermicro P6DOF (single processor), 64MB, Advansys ABP940,
Matrox Mystique, IBM 2.1 GB (DFMS), Quantum 540S,
Conner 3200 SCSI tape backup, NEC 501 x4 SCSI cdrom,
Intel Etherxpress 100B.
Y.
