[8092] in linux-scsi channel archive
Re: Compaq ProSignia NCR controler
daemon@ATHENA.MIT.EDU (jason@topic.com.au)
Sat Feb 12 00:01:22 2000
Date: Sat, 12 Feb 2000 11:00:04 +1100
From: jason@topic.com.au
To: Andreas Tille <tillea@rki.de>
Cc: linux-scsi@vger.rutgers.edu
Message-ID: <20000212110004.A10047@topic.com.au>
Reply-To: jason@topic.com.au
Mime-Version: 1.0
Content-Type: multipart/signed; micalg=pgp-md5;
protocol="application/pgp-signature"; boundary="3MwIy2ne0vdjdPXF"
In-Reply-To: <Pine.LNX.3.96.1000211090822.31758D-100000@wr-linux02.rki.de>; from tillea@rki.de on Fri, Feb 11, 2000 at 09:17:28AM +0100
--3MwIy2ne0vdjdPXF
Content-Type: text/plain; charset=us-ascii
okay if it just isa shuffling cards probably won't help. I am at a loss as
to what to do next. who else on the list has some ideas.
Andreas Tille [tillea@rki.de] wrote:
> On Fri, 11 Feb 2000, Jason Thomas wrote:
>
> > If it is not loading the scsi bios from the controller at boot up then
> > there
> > is probably some sort of hardware conflict, I would probably try
> > shuffling
> > the cards that you have in your system i.e. move the scsi card to a
> > different slot.
> I moved the Adaptec adapter to *all* available slots and removed *all*
> other cards (there was an additional VGA-card in it, now I'm using the
> on board VGA).
> Nothing helps :-(.
>
> > When you put the network card in it may be causing a
> > conflict as well, so try different slots. If your working with an intel
> > box, on boot there should be a list of irq's used by there various pci
> There is no PCI. It's just an old ISA board.
>
> > cards
> > just after the memory and hardware desciptions. I know there sorts of
> > things should not affect linux but maybe its worth a try...
> Strangely enough id was running once in the first slot I putted it in
> together with the external Compac-VGA-adapter and Compac-Network-Adapter.
> The exact restore of this configuration as well as removing all Compac
> cards refuses to work now.
>
> Also I played around with the eight mini switches labeled S1 on the
> adapter. The only effect I detected is that if they are in position
> x x x x
> x x x x
> the floppy-disk controller of the Adaptec is used (it works perfectly !!!)
> and in the position
>
> x x x x x x x x
> the internal floppy-disk controller is used. If any of the left switches
> is moved up the box refuses to boot.
>
> Also there is an empty Jumper connector with four pins labeled J1.
> Is there any chance to get it working with this beast?
>
> Kind regards
>
> Andreas.
>
--
Jason Thomas Phone: +61 2 6257 7111
System Administrator - UID 0 Fax: +61 2 6257 7311
tSA Consulting Group Pty. Ltd. Mobile: 0418 29 66 81
1 Hall Street Lyneham ACT 2602 http://www.topic.com.au/
--3MwIy2ne0vdjdPXF
Content-Type: application/pgp-signature
-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 5.0i for non-commercial use
MessageID: 0AXQFPOgSl3Erk8h2sbD1y3sc47FI5CT
Comment: Ha Ha
iQA/AwUBOKSig+3GMESSUoi+EQIIWgCg94DaHE6iITPv8Avx6tQvxTylilwAoIaj
uZuqks+5D5ZwWpR3NYEl5nAt
=4ssr
-----END PGP SIGNATURE-----
--3MwIy2ne0vdjdPXF--
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
