[7457] in linux-scsi channel archive

home help back first fref pref prev next nref lref last post

RE: Please Help - SCSI RAID device very slow

daemon@ATHENA.MIT.EDU (Matthew Clark)
Thu Oct 28 16:26:39 1999

Reply-To: <m.r.clark@btinternet.com>
From:   "Matthew Clark" <m.r.clark@btinternet.com>
To:     <bluca@comedia.it>, "Alan Cox" <alan@lxorguk.ukuu.org.uk>
Cc:     <linux-scsi@vger.rutgers.edu>, <linux-raid@vger.rutgers.edu>
Date:   Thu, 28 Oct 1999 21:18:31 +0100
Message-ID: <004b01bf2181$9a3e3890$0100a8c0@netdespatch.co.uk>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
In-reply-to: <19991028163054.D11879@colombina.comedia.it>

With the LH4, you can infact disable the AMI Megaraid and access the Symbios
directly.. however - we want to use the RAID...

I've had enough of all this guessing though - I'm going to take it to bits
and find our what's not working (gunna install NT on it and see if we still
get bad performance too)

> -----Original Message-----
> From: owner-linux-raid@vger.rutgers.edu
> [mailto:owner-linux-raid@vger.rutgers.edu]On Behalf Of Luca Berra
> Sent: 28 October 1999 15:31
> To: Alan Cox
> Cc: m.r.clark@btinternet.com; linux-scsi@vger.rutgers.edu;
> linux-raid@vger.rutgers.edu
> Subject: Re: Please Help - SCSI RAID device very slow
>
>
> On Thu, Oct 28, 1999 at 12:15:19AM +0100, Alan Cox wrote:
> > > Does anyone know how I stop the MegaRAID using the onboard INTEL SCSI
> > > Controller? (i960) It should be using my SYMBIOS card...???
> >
> > An i960 isnt a scsi controller. If you want to use the symbios
> directly load
> > the ncr53c8xx driver and not the symbios driver. I'not totally
> sure if that
> > will work but it is at least the right driver. That will
> basically cut out
> > use of the megaraid totally
>
> no way!
> the megaraid controller hides completely the symbios onboard chip
> so linux does not see it at all.
> I know of one case where it is possible to bypass the megaraid
> for at lease one channel, it is the embedded netraid(remarketed megaraid)
> on hp netservers LH3, you have to change a setting in the bios.
> All other cards i tested (netraid 1, netraid3, netraid3si)
> don't allow this option.
>
> Regards,
> Luca
>
> --
> Luca Berra -- bluca@comedia.it
>     Communications Media & Services S.r.l.
>


-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu

home help back first fref pref prev next nref lref last post