[7388] in linux-scsi channel archive
re: New tape system
daemon@ATHENA.MIT.EDU (Michael J. Rensing)
Wed Oct 20 18:22:03 1999
Date: Wed, 20 Oct 1999 14:47:40 -0700 (PDT)
From: "Michael J. Rensing" <mrmail@pp.phys.uvic.ca>
To: linux-scsi@vger.rutgers.edu
Message-ID: <Pine.HPX.4.05.9910201446150.197-100000@piranha.phys.uvic.ca>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
I solved this problem: the screw securing the card was pulling the
back of the controller out of the PCI slot. It was possible to adjust
the connector plate to allow the card to seat correctly.
Michael
------------------------------------------------------------
Dr. Michael J. Rensing | http://wwwhep.phys.uvic.ca/~michael
| mailto:mrensing@uvic.ca
Physics and Astronomy | phone: 250-721-7741
University of Victoria | fax: 250-721-7752
------------------------------------------------------------
---------- Forwarded message ----------
Date: Tue, 19 Oct 1999 15:26:29 -0700 (PDT)
From: Michael J. Rensing <mrmail@pp.phys.uvic.ca>
To: linux-scsi@vger.rutgers.edu
Subject: New tape system
I have a new tape system (ADIC FastStor22) which is attached to a
Mylex adapter. I can activate the adapter, and see that it is
installed, but I don't see any sign of the tape drive. Should the
host adapter bios see the drive? If so, I have a problem. If not, how
do I test to see if the system is seeing the drive?
Michael
------------------------------------------------------------
Dr. Michael J. Rensing | http://wwwhep.phys.uvic.ca/~michael
| mailto:mrensing@uvic.ca
Physics and Astronomy | phone: 250-721-7741
University of Victoria | fax: 250-721-7752
------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
