[7182] in linux-scsi channel archive
IOI 4203A + UMAX 1220s scanner
daemon@ATHENA.MIT.EDU (Bostjan JERKO)
Wed Sep 8 07:51:23 1999
Date: 08 Sep 1999 13:49:49 +0200
From: Bostjan JERKO <Bostjan.Jerko@socgen.com>
To: linux-scsi <linux-scsi@vger.rutgers.edu> (IPM Return requested)
Hello !
I have UMAX 1220s scanner connected to IOI 4203A SCSI card. Since scanner has DB25 connector and on SCSI
card there is only HD 50 connector. I got connector from DB25 to Centronics and then a gender changer from Centronics
to HD 50.. The problem is if I start program that came with the SCSI card and nothing is connected to the port it works fine.
After connecting the scanner to the card the program stops while starting. This happens in DOS.
I tried the same under Linux and if the port is empty Linux recognises SCSI card, but if I connect scanner to the port
it stops while "Reseting SCSI bus ".
Any ideas what might be wrong ?
B.
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
