[714] in linux-scsi channel archive
Conner Drive
daemon@ATHENA.MIT.EDU (Alan Buckwalter - x5586)
Mon Oct 23 17:47:22 1995
From: Alan Buckwalter - x5586 <alan.buckwalter@eq.gs.com>
Date: Mon, 23 Oct 1995 13:46:19 -0400
To: linux-scsi@vger.rutgers.edu
I am running 1.2.13 linux on a 486 dx2/66 computer.
I am trying to connect up a CONNER CP-30540 SCSI drive
using an Adaptec 1542B to the machine, but am experiencing
some strange behavior.
After a cold poweron.
Under DOS (yuck), when i boot the system, the drive spins
up, and is accessible. I can reboot, and all continues to
work just fine.
Under Linux, when i boot the system, Linux makes special
mention that it is spinning up the drive, and after a few
seconds, does so, and the drive is accessible. However,
if i do a warm reboot, the drive is no longer recognized.
There is a drive jumper setting for spinning up, when I have
checked, and even exchanged the drive for. Is there something
else i can try. I'l sure like to use the disk.
- Alan
_/ Alan M Buckwalter _/
_/ _/ +1 212 902 5586 _/ _/
_/ _/ _/ alan@.eq.gs.com _/ _/ _/
