[7120] in linux-scsi channel archive
naive scsi user needs help with new device
daemon@ATHENA.MIT.EDU (charles anderson)
Thu Sep 2 18:11:38 1999
Date: Thu, 2 Sep 1999 15:21:31 -0600 (MDT)
From: charles anderson <anderson@CS.ColoState.EDU>
To: linux-scsi@vger.rutgers.edu
I am trying to set up an EEG recording system with Linux on a laptop.
The EEG amplifier is a scsi device, called Mindset from Aquathought
(www.aquathought.com). I am having trouble booting with the Mindset
attached. I have verified that the Mindset works correctly under
Win98 on a different laptop using my Adaptec SlimSCSI 1480a card. I
also verifid that my laptop running Linux correctly accessing a scsi
Yamaha CDRW using my Adaptec 1480a card. But when I attach the
Mindset and reboot, it get a lot of time out messages. I am using the
Red Hat 6.0 and pcmcia-3.0.14.
Below is part of the /var/log/messages file. Any clues or suggestions
would be greatly appreciated.
----------------------------------------------------------------------
Chuck Anderson associate professor
Department of Computer Science anderson@cs.colostate.edu
Colorado State University http://www.cs.colostate.edu/~anderson
Fort Collins, CO 80523-1873 office: 970-491-7491, FAX: 970-491-2466
----------------------------------------------------------------------
Sep 2 00:57:40 eeg syslogd 1.3-3: restart.
Sep 2 00:57:40 eeg syslog: syslogd startup succeeded
Sep 2 00:57:40 eeg syslog: klogd startup succeeded
Sep 2 00:57:41 eeg kernel: klogd 1.3-3, log source = /proc/kmsg started.
Sep 2 00:57:41 eeg kernel: Inspecting /boot/System.map-2.2.5-15
.
.
.
Sep 2 00:57:41 eeg kernel: Detected 262397316 Hz processor.
.
.
.
Sep 2 00:57:42 eeg kernel: Linux PCMCIA Card Services 3.0.14
Sep 2 00:57:42 eeg kernel: kernel build: 2.2.5-15 #1 Mon Apr 19 22:21:09 EDT 1999
Sep 2 00:57:42 eeg kernel: options: [pci] [cardbus] [apm]
Sep 2 00:57:42 eeg kernel: Intel PCIC probe:
Sep 2 00:57:42 eeg kernel: Ricoh RL5C475 PCI-to-CardBus at bus 0 slot 10, mem 0x68000000, 1 socket
Sep 2 00:57:42 eeg kernel: host opts [0]: [serial irq] [io 3/6/1] [mem 3/6/1] [no pci irq] [lat 168/176] [bus 32/34]
Sep 2 00:57:42 eeg kernel: ISA irqs (default) = 3,4,7,10,11,12,15 polling interval = 1000 ms
Sep 2 00:57:43 eeg kernel: cs: IO port probe 0x1000-0x17ff: clean.
...
Sep 2 00:57:43 eeg kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x388-0x38f 0x398-0x39f 0x4d0-0x4d7
Sep 2 00:57:43 eeg kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Sep 2 00:57:48 eeg kernel: cs: cb_config(bus 32): vendor 0x9004, device 0x6075
Sep 2 00:57:48 eeg kernel: fn 0 bar 1: io 0xa00-0xaff
Sep 2 00:57:48 eeg kernel: fn 0 bar 2: mem 0xa0021000-0xa0021fff
Sep 2 00:57:48 eeg kernel: fn 0 rom: mem 0xa0011000-0xa0020fff
Sep 2 00:57:48 eeg kernel: apa1480_attach(bus 32, function 0)
Sep 2 00:57:48 eeg kernel: aic7xxx: <Adaptec PCMCIA SCSI controller> at PCI 0/0
Sep 2 00:57:48 eeg kernel: aic7xxx: MMAPed I/O failed, reverting to Programmed I/O.
Sep 2 00:57:40 eeg random: Initializing random number generator succeeded
Sep 2 00:57:42 eeg pcmcia: Starting PCMCIA services:
Sep 2 00:57:48 eeg kernel: (scsi0) <Adaptec PCMCIA SCSI controller> found at PCI 0/0
Sep 2 00:57:48 eeg kernel: (scsi0) Narrow Channel, SCSI ID=7, 3/255 SCBs
Sep 2 00:57:48 eeg kernel: (scsi0) Downloading sequencer code... 413 instructions downloaded
Sep 2 00:57:48 eeg kernel: scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.15/3.2.4
Sep 2 00:57:48 eeg kernel: <Adaptec PCMCIA SCSI controller>
Sep 2 00:57:48 eeg kernel: scsi : 1 host.
Sep 2 00:57:42 eeg pcmcia: modules
Sep 2 00:57:42 eeg pcmcia: cardmgr.
Sep 2 00:57:42 eeg cardmgr[342]: starting, version is 3.0.14
Sep 2 00:57:43 eeg cardmgr[342]: watching 1 sockets
Sep 2 00:57:43 eeg cardmgr[342]: initializing socket 0
Sep 2 00:57:43 eeg cardmgr[342]: socket 0: Adaptec APA-1480 SCSI Host Adapter
Sep 2 00:57:43 eeg cardmgr[342]: executing: 'insmod /lib/modules/2.2.5-15/pcmcia/cb_enabler.o'
Sep 2 00:57:43 eeg cardmgr[342]: executing: 'insmod /lib/modules/2.2.5-15/pcmcia/apa1480_cb.o'
Sep 2 00:57:43 eeg rc: Starting pcmcia succeeded
Sep 2 00:57:50 eeg inet: inetd startup succeeded
Sep 2 00:57:51 eeg lpd: lpd startup succeeded
Sep 2 00:57:52 eeg nfs: Starting NFS services: succeeded
Sep 2 00:57:52 eeg nfs: rpc.statd startup succeeded
Sep 2 00:57:53 eeg nfs: rpc.rquotad startup succeeded
Sep 2 00:57:53 eeg nfs: rpc.mountd startup succeeded
Sep 2 00:57:54 eeg kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Sep 2 00:57:54 eeg nfs: rpc.nfsd startup succeeded
Sep 2 00:57:54 eeg keytable: Loading keymap:
Sep 2 00:57:54 eeg keytable: Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz
Sep 2 00:57:55 eeg keytable: Loading system font:
Sep 2 00:57:55 eeg kernel: scsi : aborting command due to timeout : pid 2, scsi0, channel 0, id 2, lun 0 Test Unit Ready 00 00 00 00 00
Sep 2 00:57:55 eeg rc: Starting keytable succeeded
Sep 2 00:57:55 eeg kernel: SCSI host 0 abort (pid 2) timed out - resetting
Sep 2 00:57:55 eeg kernel: SCSI bus is being reset for host 0 channel 0.
Sep 2 00:57:57 eeg kernel: SCSI host 0 channel 0 reset (pid 2) timed out - trying harder
Sep 2 00:57:57 eeg kernel: SCSI bus is being reset for host 0 channel 0.
Sep 2 00:57:58 eeg sendmail: sendmail startup succeeded
Sep 2 00:57:58 eeg gpm: gpm startup succeeded
Sep 2 00:57:58 eeg sound: Starting sound configuration:
Sep 2 00:57:58 eeg sound: sound
Sep 2 00:57:58 eeg sound:
Sep 2 00:57:58 eeg rc: Starting sound succeeded
Sep 2 00:57:59 eeg PAM_pwdb[508]: (su) session opened for user xfs by (uid=0)
Sep 2 00:58:00 eeg pam_xauth[508]: do_file: could not create dir /etc/X11/fs/.xauth
Sep 2 00:58:00 eeg PAM_pwdb[508]: (su) session closed for user xfs
Sep 2 00:58:00 eeg pam_xauth[508]: do_file: could not create dir /etc/X11/fs/.xauth
Sep 2 00:58:00 eeg xfs: xfs startup succeeded
Sep 2 00:58:00 eeg linuxconf: Linuxconf final setup
Sep 2 00:58:01 eeg rc: Starting linuxconf succeeded
Sep 2 00:58:01 eeg rc: Starting local succeeded
Sep 2 00:58:04 eeg kernel: SCSI host 0 abort (pid 2) timed out - resetting
Sep 2 00:58:04 eeg kernel: SCSI bus is being reset for host 0 channel 0.
Sep 2 00:58:05 eeg kernel: SCSI host 0 channel 0 reset (pid 2) timed out - trying harder
Sep 2 00:58:05 eeg kernel: SCSI bus is being reset for host 0 channel 0.
Sep 2 00:58:12 eeg kernel: SCSI host 0 abort (pid 2) timed out - resetting
Sep 2 00:58:12 eeg kernel: SCSI bus is being reset for host 0 channel 0.
Sep 2 00:58:16 eeg kernel: scsi : aborting command due to timeout : pid 3, scsi0, channel 0, id 2, lun 0 Inquiry 00 00 00 ff 00
Sep 2 00:58:17 eeg kernel: SCSI host 0 abort (pid 3) timed out - resetting
Sep 2 00:58:17 eeg kernel: SCSI bus is being reset for host 0 channel 0.
Sep 2 00:58:19 eeg kernel: Vendor: AquaLabs Model: MS-1000 Rev: 20
Sep 2 00:58:19 eeg kernel: Type: Processor ANSI SCSI revision: 00
Sep 2 00:58:25 eeg kernel: scsi : aborting command due to timeout : pid 4, scsi0, channel 0, id 3, lun 0 Test Unit Ready 00 00 00 00 00
Sep 2 00:58:25 eeg kernel: SCSI host 0 abort (pid 4) timed out - resetting
Sep 2 00:58:25 eeg kernel: SCSI bus is being reset for host 0 channel 0.
Sep 2 00:58:27 eeg kernel: SCSI host 0 channel 0 reset (pid 4) timed out - trying harder
Sep 2 00:58:27 eeg kernel: SCSI bus is being reset for host 0 channel 0.
Sep 2 00:58:34 eeg kernel: SCSI host 0 abort (pid 4) timed out - resetting
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
