[7097] in linux-scsi channel archive
Problems with SCSI HD w/ 7200 PMac
daemon@ATHENA.MIT.EDU (josh monesson)
Wed Sep 1 15:54:22 1999
Date: Wed, 01 Sep 1999 14:14:24 -0400
From: josh monesson <jm@itedge.com>
To: linux-scsi@vger.rutgers.edu
--------------A95DCB696FA69FEAAEA9AC58
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: base64
Good Day,
I'm having trouble installing LinuxPPC on my PMac 7200, and I think
I've
narrowed the problem down to my SCSI HD. It is a Seagate Elite 9
410800N,
and it works just fine on the Mac OS side of things.
Here's the situation, I'd installed all of the software just fine,
have found
a kernel that works, and can boot the XWindow installer just fine.
Partitioned
and mounted everything just fine, and even started to load the RPMs!
Until, the system halts(the clock icon doesn't flash the ':' anymore),
and the
activity light on my HD stays lit. Usually in about 5 minutes, the
system
returns and give me a message:
"SCSI Disk I/O error :dev 08:18 sector **** return code 25040000"
If you could please offer me any assistance, I would really
appreciate it!
Do you think it's just the issue of an older SeaGate drive with the
Linux
partitioning? Could a new HD driver cure my woes?
Thanks for listening, and a response would be very much appreciated!
--
-----------------------------------
Josh Monesson mailto:jm@itedge.com
2D/3D Designer, Video Post, Interactive Development
Infinity Technologies http://www.infinity-technologies.com
--------------A95DCB696FA69FEAAEA9AC58
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
Good
Day,
<br> I'm having trouble installing LinuxPPC on my PMac
7200, and I think
<br>I've
<br>narrowed the problem down to my SCSI HD. It is a Seagate Elite
9
<br>410800N,
<br>and it works just fine on the Mac OS side of things.
<br> Here's the situation, I'd installed all of the software
just fine,
<br>have found
<br>a kernel that works, and can boot the XWindow installer just fine.
<br>Partitioned
<br>and mounted everything just fine, and even started to load the RPMs!
<br>Until, the system halts(the clock icon doesn't flash the ':' anymore),
<br>and the
<br>activity light on my HD stays lit. Usually in about 5 minutes,
the
<br>system
<br>returns and give me a message:
<br>"SCSI Disk I/O error :dev 08:18 sector **** return code 25040000"
<br> If you could please offer me any assistance, I would
really
<br>appreciate it!
<br>Do you think it's just the issue of an older SeaGate drive with the
<br>Linux
<br>partitioning? Could a new HD driver cure my woes?
<br> Thanks for listening, and a response would be very
much appreciated!
<br>
<br>
<pre>--
-----------------------------------
Josh Monesson <A HREF="mailto:jm@itedge.com">mailto:jm@itedge.com</A>
2D/3D Designer, Video Post, Interactive Development
Infinity Technologies <A HREF="http://www.infinity-technologies.com">http://www.infinity-technologies.com</A></pre>
</html>
--------------A95DCB696FA69FEAAEA9AC58--
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
