[6560] in linux-scsi channel archive
Raid problems
daemon@ATHENA.MIT.EDU (Nick Vermeer*)
Fri May 28 15:03:39 1999
Date: Wed, 26 May 1999 13:07:04 -0500 (CDT)
From: Nick Vermeer* <nickv@netexpress.net>
To: linux-raid@vger.rutgers.edu, linux-scsi@vger.rutgers.edu
To: linux-raid@vger.rutgers.edu
Subject: Raid problems
I have linux-2.2.6 + raid-0145-2.2.6 patches running on an SMP Dual PIII-500 w/
512MB ram
2 Adaptec 2940U2W's w/ IBM 9.1 Gig 10,000RPM LVD drives
Current config
SCSI ID Controler Card
0 scsi1
0 scsi0
1 scsi1
2 scsi0
3 scsi1
4 scsi0
Scsi ID's 1+2+3+4 are raid 5'ed and the two 0's are RAID 1
Here is the problem.. Every three days (give or take a few hours) the machine
crashes with the following error
May 22 00:45:10 shamu kernel: (scsi1:0:1:-1) Unexpected busfree, LASTPHASE=0x40, SEQADDR = 0x15d
May 22 00:45:10 shamu kernel: (scsi1:0:1:0) No active SCB for reconnecting target - Issuing BUS DEVICE RESET.
May 22 00:45:10 shamu kernel: (scsi1:0:1:0) SAVED_TCL=0x10, ARG_1=0xff, SEQADDR=0x10b
I believed this to be a hardware error, but I have replaced the
drive,case,cable and changed the configuration of the chain and the problem
continues. Also whenever the machine is halted, the scsi id 1 is kicked out of
the raid array as not in sync. Any ideas? The other chain (which is identical
physically) has no problems
---
Nick Vermeer Internet Express
Network Administator 1518 5th ave.
(309)736-8000 Moline IL, 61265
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
