[6404] in linux-scsi channel archive
Re: kernel 2.2.6 Buslogic trouble
daemon@ATHENA.MIT.EDU (jlewis@lewis.org)
Fri Apr 23 22:38:41 1999
Date: Fri, 23 Apr 1999 21:25:20 -0400 (EDT)
From: jlewis@lewis.org
To: "Leonard N. Zubkoff" <lnz@dandelion.com>
cc: linux-scsi@vger.rutgers.edu
In-Reply-To: <199904231840.LAA15838@dandelion.com>
On Fri, 23 Apr 1999, Leonard N. Zubkoff wrote:
> I just tried upgrading one of my home systems from 2.0.36 to 2.2.6. The
> box is a Tyan Tomcat II, dual P120, 64mb, BT-946, Micropolis (I
> know...blech) 1991, ATI Mach64, and a few SMC ethernet cards. It's worked
> great under 2.0.x for a few years. It gets as far as SCSI probing in
> 2.2.6 and blows up. After all the Buslogic SCSI messages, I get:
>
> scsi: 1 host.
> scsi: aborting command due to timeout: pid 0, scsi0, channel0, id0, lun0
> Test Unit Ready 00 00 00 00 00
> scsi0: aborting CCB#1 to target0
>
> Sounds like an interrupt routing problem with the Tomcat II. The driver is
> unable to complete any commands as it never gets an interrupt.
Upgrading to the latest BIOS Tyan had available for the board fixed the
problem. System boots fine now. Now I can start learning all the 2.2.x
kernel changes...annoying little things like the parallel port which was
once lp0, then lp1, is now lp0 again!...and it takes 3 modules to use it.
:)
----don't waste your cpu, crack rc5...www.distributed.net team enzo---
Jon Lewis *jlewis@lewis.org*| Spammers will be winnuked or
System Administrator | nestea'd...whatever it takes
Atlantic Net | to get the job done.
_________http://www.lewis.org/~jlewis/pgp for PGP public key__________
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
