[59] in linux-scsi channel archive
While we're on the subject...
daemon@ATHENA.MIT.EDU (Michael Adas)
Wed Feb 1 14:41:34 1995
Date: Wed, 1 Feb 1995 12:44:29 -0600
From: Michael Adas <mja@telecom.wisc.edu>
To: linux-scsi@vger.rutgers.edu
When can we expect to see support for disconnection in the NCR
driver? I'm not in a huge hurry <nudge, nudge>, but it seems
as though this would greatly improve performance with multiple
drives. If I had a clue, I'd implement it myself. Is this a
difficult thing to add for the NCR53c810, or just not a priority
issue right now?
One more thing.. I have an AHA1542C in addition to the on-board
NCR53c810 (486 Saturn II board), and I have had *no* luck in
getting linux to find both hosts. It sees the 1542, but not
the ncr. I tried lilo command line options without success.
One thing that springs to mind is the fact that there are no
devices on the 1542. At present it is acting as a *very*
expensive floppy controller :)
--
= Michael J. Adas - DoIT Installation & Repair
= An open mind tolerates and empty one.
--
