[5828] in linux-scsi channel archive
Scsi-Emulation+AIX-7xxx+HP 7110 IDE CDR
daemon@ATHENA.MIT.EDU (orion@phlan.net)
Tue Feb 9 16:25:24 1999
From: orion@phlan.net
Date: Tue, 9 Feb 1999 15:23:56 -0600
To: linux-scsi@vger.rutgers.edu
Hi,
Ever since 2.2.0pre8, I have not been able to boot the kernel with
scsi-emulation enable for my hp burner. After the aic7xxx driver (version
5.1.10) detects my scsi hard drive, the cdr gets detected and the kernel
stops booting:
Detected scsi CD-Rom at sr0 at scsi1, channel 0, id 0, lun 0
SCSI Channel 0:resetting for second half of retries.
SCSI bus is being reset for host 1 channel 0.
SCSI: aborting command due to timeout: pid 25, scsi 1, channel 0, id 0,
lun 1, Request Sense 20 00 00 10 00
scsi: detected 1 SCSI CD-Rom 1 SCSI Disk total.
**freezes**
Without scsi emulation, it boots fine, but then I can't burn cd's. Kernel
2.0.36 with an older aic7xxx driver (version 5.1.4) boots fine. Is there
a newer aic7xxx driver that will fix this? Or is it a problem with
scsi-emulation?
Thanks,
Mike
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
