[5768] in linux-scsi channel archive
Re: MEGARAID PROBLEM WITH KERNEL 2.2.1 ?
daemon@ATHENA.MIT.EDU (A James Lewis)
Wed Feb 3 08:19:56 1999
Date: Wed, 3 Feb 1999 13:18:06 +0000 (GMT)
From: A James Lewis <james@vrtx.net>
To: Carlos Bote <cbote@el-mundo.net>
Cc: linux-raid@vger.rutgers.edu, linux-scsi@vger.rutgers.edu
In-Reply-To: <Pine.LNX.3.96.990203140419.23602A-100000@zape>
Unfortunately, I can't help you with your question... but perhaps you can
help me with mine!
I am interested in setting up a Linux based server with an HP box but had
rejected the HP Raid because I was unaware of support for the beast,.,.
If you are using it, I can only deduce that there is support, so perhaps
you can tell me which driver and what the configuration issues are? I
have never used a hardware raid card under Linux, but am no stranger to
Linux... so any advice or informational URL's you can point me to would
also be helpfull.... I also wish to use it with 2.2.x so perhaps once I
have the system up I can try to duplicate your problem....
James
On Wed, 3 Feb 1999, Carlos Bote wrote:
>
>
> Hello all
>
> I think i've found a problem in the MEGARAID driver for HP NetRaid card.
>
> With Kernel 2.0.36 and his patch works fine, but with kernel 2.2.1, when I
> do a complete backup with "tar" or with "dd" (or similar, "amanda",
> "taper" , "dump") I get the message (after some archives)
>
> "SCSI: Aborting command due to timeout: pid 53243, SCSI 2, channel 1, id 0 lun 0
> Write (8) 00 40 67 04 00"
>
> And the system crash. The system has support for SMP with dual Pentium II.
>
> Can you help me, please, urgent !!
>
> Good Bye
>
>
>
James (james@linuxrocks.co.uk)
My operating system unders~1 long filena~1, and yours?
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
