[5678] in linux-scsi channel archive
DPT PM3334UW problem
daemon@ATHENA.MIT.EDU (Marc Alvidrez)
Sun Jan 24 15:19:28 1999
Date: Sun, 24 Jan 1999 10:08:29 -0800 (PST)
From: Marc Alvidrez <alvia@OCF.Berkeley.EDU>
To: linux-scsi@vger.rutgers.edu
I have been unable to boot with or load as a module the eata_dma
driver on the 2.0.36 kernel using a DPT PM3334UW controller. Booting with
eata_dma support compiled direcly into the kernal causes the boot to hang
right after the Adaptec 2940UW is recognized. When I compile eata_dma as
a module and then attempt an insmod, I get something like:
Hba at 0xef50 does not react to INQUIRY command, sorry
scsi: 0 hosts
and then system freezes cold. I found almost the same error here:
http://www.dejanews.com/getdoc.xp?AN=426938284. The HBA address is the
only difference in the error report on my system.
I do not believe there is a conflict between the DPT and Adaptec
controllers. I am running the most recent revision of the Adaptec driver
and have been searching for the newest eata_dma driver. The eata_dma.c I
am using has a last change date of 96/10/21. If there is a newer one, I
have not been able to find it.
This is an SMP system, but attempts to boot with kernels compiled with the
eata_dma driver in both single and multiple cpu configurations have
failed.
I would appreciate any help anyone might be able to offer. Please cc my
email acct directly in any responses.
Thanks in advance!
-Marc
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
