[5255] in linux-scsi channel archive
Problem with AHA-1520
daemon@ATHENA.MIT.EDU (Patrick Jordan-Smith)
Wed Dec 2 07:11:43 1998
From: "Patrick Jordan-Smith" <patrick.jordan-smith@teltrend.co.nz>
To: linux-scsi@vger.rutgers.edu
Date: Wed, 2 Dec 1998 16:18:14 +1300 (NZDT)
Reply-to: patrick.jordan-smith@teltrend.co.nz
Hi, I have the following problem on my linux box, it has
one sony dat drive attached to it, I get a crash like
the following (if I turn on scsi debugging):
(command = 'dd if=linux.tgz of=/dev/st0 bs=32k')
---8<----------------8<-----------------------8<------
0(8) left in FIFO
aha152x: FIFO should be empty
QUEUE STATUS:
issue_SC:
current_SC:
0xc0094400: target=1; lun=0; cmnd=(Write (6) 01 00 00 40
00); residual=28009; buffers=0; phase |send_ident|; in
other (DATA OUT): next=0x00000000
disconnected_SC:
on bus: SCSISEQ (); SCSISIG (DATA OUT); INTSTAT (lo);
SSTAT (SELDI REQINIT); SSTAT (); SXFRCTL0 (CH1 ); SIGNAL
(BSYI REQI ); SELID (82), SSTAT2 (SFULL ); SFCNT (8);
SCSICNT (0), OFFSNT (0), SSTAT4 (); DMACNTRL0 (16BIT PIO
WRITE ); DMASTAT (WORDRDY DFIFOEMP )
enabled interrupts (ENPHASEMIS ENBUSFREE )
Kernel panic: aha152x panic
In swapper task - not syncing
---8<----------------8<-----------------------8<------
This is a _real_ 1520 card, not a clone or anything on a
133mhz pentium with 16 megs ram.
Anything else just ask,
Thanks,
Patrick
--
Patrick Jordan-Smith,
Unix Systems Administrator,
Teltrend (NZ) Ltd.
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
