[5064] in linux-scsi channel archive
adapetc 1520
daemon@ATHENA.MIT.EDU (LaRoy McCann)
Sat Nov 7 10:53:04 1998
Date: Sat, 07 Nov 1998 09:33:06 -0600
To: linux-scsi <linux-scsi@vger.rutgers.edu>
From: LaRoy McCann <laroy@bscn.com>
I am trying to get linux to recoginize the adapetc 1520B scsi card.
I'm running Red Hat 5.1 (2.0.34) that was installed before I bought the
scsi card.
The port I/O address is 0x140, the irq is 11, and the bios address is CC000h.
The boot process shows nothing about the card and shows "scsi : 0 hosts".
I have checked the proc/interrupts and /proc/ioports files and do not see
any conflicts.
I have added the following line in /etc/lilo.conf.:
append="aha152x=0x140,11,7,1".
The think that the format for the append statement is as follows:
(driver, io address, irq, device address, ????) not sure what the last
parameter is.
Does linux have built in support for this card or is there some driver or
module that I need.
The documentation from Red Hat's web site said that the card has Tier 2
support which means that it will work but they do not support it. (I think)
I do not have anything hooked to the card at this time. I have a drive
from a AT&T sysv system that I have to get some information from. (thats a
whole nother story)
Thanks in advance.
LaRoy McCann
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
