[5060] in linux-scsi channel archive
First Post-Zip Zoom/SCSI Zip
daemon@ATHENA.MIT.EDU (Joe Frey)
Fri Nov 6 23:21:54 1998
Date: Fri, 06 Nov 1998 22:54:03 -0500
From: Joe Frey <jfrey@bon.net>
Reply-To: jfrey@bon.net
To: linux-scsi <linux-scsi@vger.rutgers.edu>
Hello all, I've been trying to follow the instructions to install a Zip
Zoom card. The Zip-Drive HOW-TO is pretty clear but I'm confused about
needing Zip ppa support. I don't need this do I? It's a SCSI disk on a
SCSI host if I'm using the aha152x driver on with the Zoom card. Anyway
my boot messages are listed below. My system finds the card (I think)
but can't read the zip. Can someone help explain what's happening here.
The set-up is correct when I boot into NT.
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP
Appletalk 0.17 for Linux NET3.035
VFS: Diskquotas version dquot_5.6.0 initialized
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Intel Pentium with F0 0F bug - workaround enabled.
alias mapping IDT readonly ... ... done
Linux version 2.0.34 (root@troubledone.radioles) (gcc version 2.7.2.3)
#3 Mon Nov 2 23:14:58 EST 1998
Starting kswapd v 1.4.2.2
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
lp1 at 0x0378, (polling)
PS/2 auxiliary pointing device detected -- driver installed.
Real Time Clock Driver v1.07
Sound initialization started
<Sound Blaster 16 (4.13)> at 0x220 irq 5 dma 1,5
Installed 0
<Sound Blaster 16> at 0x330 irq 5 dma 0
<Yamaha OPL3 FM> at 0x388
Sound initialization complete
Ramdisk driver initialized : 16 ramdisks of 4096K size
loop: registered device at major 7
ide: i82371 PIIX (Triton) on PCI bus 0 function 57
ide0: BM-DMA at 0xf000-0xf007
ide1: BM-DMA at 0xf008-0xf00f
hda: WDC AC34300L, 4104MB w/256kB Cache, CHS=523/255/63, UDMA
hdb: 655A, ATAPI CDROM drive
hdc: Maxtor 71626 A, 1554MB w/64kB Cache, CHS=3158/16/63, DMA
hdd: DSAA-3540, 504MB w/96kB Cache, CHS=1024/16/63
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.35 MAX_MD_DEV=4, MAX_REAL=8
aha152x: processing commandline: ok
aha152x: BIOS test: passed, detected 1 controller(s)
aha152x0: vital data: PORTBASE=0x140, IRQ=11, SCSI ID=7,
reconnect=enabled, parity=enabled, synchronous=disabled, delay=100,
extended translation=disabled
aha152x: trying software interrupt, lost.
aha152x: IRQ 11 possibly wrong. Please verify.
PPA: ports at 0x378 are not available
scsi0 : Adaptec 152x SCSI driver; $Revision: 1.18 $
scsi : 1 host.
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 1, scsi0, channel 0, id 1,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 1, scsi0, channel 0, id 1,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 2, scsi0, channel 0, id 2,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 2, scsi0, channel 0, id 2,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 3, scsi0, channel 0, id 3,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 3, scsi0, channel 0, id 3,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 4, scsi0, channel 0, id 4,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 4, scsi0, channel 0, id 4,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 5, scsi0, channel 0, id 5,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 5, scsi0, channel 0, id 5,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 6, scsi0, channel 0, id 6,
lun 0 Test Unit Ready 00 00 00 00 00
scsi : detected total.
Partition check:
hda: hda1 hda2 < hda5 hda6 >
hdc: hdc1
hdd: [PTBL] [512/32/63] hdd1
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 128484k swap-space (priority -1)
sysctl: ip forwarding off
Swansea University Computer Society IPX 0.34 for NET3.035
IPX Portions Copyright (c) 1995 Caldera, Inc.
Finally, can some one point me to a good basic how-to on the way modules
are loaded in linux. Since the distributions have different names and
places for the modules, maybe I could understand mine (RedHat) if I
could understrand the process in general.
And last but not least, anyone suggest a good book or resource on how
computers work in general as well. I know I've asked for alot but I'd be
really greatful for ant help.
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
