[5006] in linux-scsi channel archive
big aic7xxx-problem with 2.1.125 and 2.1.126
daemon@ATHENA.MIT.EDU (Matthias Hennig)
Mon Oct 26 19:55:35 1998
Date: Mon, 26 Oct 1998 23:14:49 +0100
From: Matthias Hennig <Matthias.H.Hennig@ruhr-uni-bochum.de>
To: linux-smp <linux-smp@vger.rutgers.edu>, linux-scsi@vger.rutgers.edu
Hi!
I still have the aic7xxx-driver problem with the new kernels (2.1.125,
2.1.126). While booting, the driver scans all scsi-id's and fins my
Segate Barracuda at id 0. Then I get a lot of time-outs while the driver
tries to scan the other id's. My boot-device is a scsi-drive, so I
cannot try the driver as a module. Maybe this is a smp-problem because
nobody complained about that on the scsi mailing-list yet. I have
updated the BIOS and checked the termination, this did not help.
(2.1.124 works fine!!)
This is my System:
Asus P2L97-DS Board
(scsi0) <Adaptec AIC-7880 Ultra SCSI host adapter> found at PCI 6/0
SCSI Adapter: Adaptec AIC-7880 Ultra SCSI host adapter
Ultra Wide Controller
PCI MMAPed I/O Base: 0xe0800000
Adaptec SCSI BIOS: Enabled
IRQ: 9
SCBs: Active 0, Max Active 1,
Allocated 30, HW 16, Page 255
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE Model: ST34572W Rev: 0784
Type: Direct-Access ANSI SCSI revision: 02
Hope someone finds the problem...
Matthias
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
