[496] in linux-scsi channel archive
aic7770 problem
daemon@ATHENA.MIT.EDU (Fons Botman)
Sat Aug 12 04:35:20 1995
To: linux-scsi@vger.rutgers.edu
Date: Sat, 12 Aug 95 1:09:42 MET
From: Fons Botman <ND3995!botman@relay.nl.net>
Reply-To: botman@wab-tis.rabobank.nl
Reply-To: botman@rabo.nl
Hello,
I tried booting linux 1.3.15 on a machine with pentium, 3c509, and
a twin aic7770 on the motherboard. But it hangs during boot.
The machine runs well under M?DOS, Netware and UnixWare.
Any suggestions how can I add Linux to this list?
Fons.
aha274x: extended translation disabled
aic7770: Rev C and previous; using 4SCB's
aic7xxx: Using Level Sensitive Interrupts
aic7xxx: Enabled channel B of 274x-Twin
AIC7770-TWIN AT EISA SLOT9:
irq 11
bus release time 60 bclks
data fifo threshold 100%
SCSI CHANNEL A:
scsi id 7
scsi selection timeout 256 ms
scsi bus reset at power-on enabled
scsi bus parity enabled
scsi bus termination (low byte) disabled
aic7xxx: Downloading sequencer code..done.
Resetting the SCSI bus...
eata_dma: No BIOS32 extentions present. This driver release still depends on it.
0 Skipping scan for PCI HBAs.
aic7xxx_isr: Encountered spurious interrupt.
aic7xxx_isr: brkadrint (0x1):
Illegal Host Access
Kernel panic: aic7xxx_isr: brkadrint, error = 0x1, seqaddr = 0x0
In swapper task - not syncing
